Banner Engineering Q4X Sensor IO-Link Data Reference Guide

IO-Link data map for Banner Engineering Q4X sensors, covering communication parameters, process data in, parameters and events.


Banner Engineering Q4X Sensor IO-Link Data Reference Guide - cover page
Brand
Banner Engineering
Category
sensor
Document type
Programming Manual
Language
English
Pages
6
File format
PDF
File size
118 KB
Published
17 November, 2026
Updated
17 November, 2026
MD5 checksum
54CA04BD6F3CB3304AEB090D0588D9CE

About this manual

This IO-Link Data Reference Guide covers the Banner Engineering Q4X laser sensor. It refers to the IODD file Banner_Engineering-Q4X-20150313-IODD1.1.xml for the 100/110 mm and 300/310 mm models, and Banner_Engineering-Q4X-600mm-20161205-IODD1.1.xml for the 600/610 mm models. The original document is 198185 Rev. E.

The guide lists the IO-Link communication parameters, the 16-bit Process Data In layout sent from the device to the master, and the acyclic parameters that can be read or written, including setpoints, configuration, status and statistics. It also lists IO-Link event codes. Process Data Out is not applicable.

What's inside

  • IODD File Reference
  • Communication Parameters
  • IO-Link Process Data In (Device to Master)
  • IO-Link Process Data Out (Master to Device)
  • Parameters Set Using IO-Link
  • BDC1 and BDC2 Setpoints and Configuration
  • Configuration Parameters
  • Status and Statistics
  • Pulse Frequency Configuration
  • IO-Link Events

Specifications

IO-Link revisionV1.1
Process Data In length16 bits
Process Data Out lengthN/A
Bit rate38400 bps
Minimum cycle time2.7 ms
Port classA
Measurement value resolutionTenths of a millimeter

Frequently asked questions

What IO-Link revision does the Q4X sensor use?

The Q4X uses IO-Link revision V1.1.

How often is the process data sent to the IO-Link master?

The process data is sent to the IO-Link master every 2.7 ms.

What is included in the 16-bit Process Data In?

It includes the measurement distance, the stability indicator state and the state of both Q4X output channels.

What does the laser fault event indicate?

It is an error event with code 36096 (0x8d00) indicating the laser shut down for safety.

Download PDF (118 KB)

More Banner Engineering Manuals


View all Banner Engineering manuals →