Reference guide for ArubaOS 5.0 command line interface, covering command syntax, new and modified commands, CLI access, and command help.
ArubaOS 5.0 Command Line Interface Reference Guide describes the ArubaOS command syntax for configuring and managing Aruba controllers. Commands are listed alphabetically, and each entry is documented with syntax, description, usage guidelines, an example, command history, and command information.
The guide also lists commands added, modified, and deprecated in ArubaOS 5.0. It explains how to connect to the controller through the serial port or a Telnet or SSH session, how to move between user, enable, and config modes, and how to use question-mark command help.
| CLI access methods | Local console serial connection; Telnet; SSH |
|---|---|
| Default Telnet access | Disabled |
| Serial port communication settings | 9600 baud, 8 data bits, parity None, 1 stop bit, no flow control |
Connect a terminal or PC to the controller's serial port, or use a Telnet or SSH session from a remote management console or workstation.
9600 baud, 8 data bits, no parity, 1 stop bit, and no flow control.
No. Telnet access is disabled by default; it can be enabled with the telnet cli command from a serial connection or SSH session, or in the WebUI.
It provides command syntax, a description, parameter syntax, usage guidelines, an example, command history, and command information.