The ICP‑CC488 control master provides up to eight programmable wired or wireless zones, two partitions, and a range of alarm functions such as daytime, coercion, and keyboard anti‑tamper alarms. Remote programming can be performed via a PC running MS‑DOS with the CC816 Alarm Link (A‑Link) software, allowing configuration from hundreds of kilometres away.
Technical data include current consumption (115 mA alarm, 105 mA with keyboard, 65 mA standby), power requirements (240 VAC primary, 18 VAC secondary, 12 VDC backup 6.5 Ah), environmental limits (10 %–95 % RH, 0 °C–+45 °C), dimensions (306 mm × 262 mm × 84 mm) and weight (2.5 kg). The manual also lists compatible RF receivers, accessories, and ordering information for various regional variants. This manual is written in Chinese.
| Alarm state current consumption | 115 mA |
|---|---|
| Current consumption with keyboard | 105 mA |
| Standby current consumption | 65 mA |
| Primary power input | 240 VAC |
| Secondary power input | 18 VAC, 1.3 A |
| Backup power | 12 VDC, 6.5 Ah sealed lead‑acid battery |
| Operating temperature range | 0 °C to +45 °C |
| Relative humidity range | 10 % to 95 % (no condensation) |
| Dimensions (W × H × D) | 306 mm × 262 mm × 84 mm |
| Weight | 2.5 kg |
It supports up to eight user codes and eight wireless remote codes.
The battery test runs automatically every four hours and also each time the system is armed.
Yes, remote programming is possible using a PC with MS‑DOS and the CC816 Alarm Link (A‑Link) software over a modem connection.