The Dell PowerEdge Expandable RAID Controller 4/Di/Si and 4e/Di/Si User's Guide provides information on how to use and manage the Dell PowerEdge Expandable RAID Controller 4/Di/Si and 4e/Di/Si. This guide covers the following topics: Safety Instructions, Overview, RAID Introduction, Features, RAID Configuration and Management, Driver Installation, Troubleshooting, and Appendix.
This document is the user guide for the Dell PowerEdge Expandable RAID Controller models 4/Di/Si and 4e/Di/Si. It provides instructions on safety, RAID basics, features, configuration and management, driver installation, and troubleshooting. The guide also includes appendices with regulatory notices and a glossary. This manual is written in Chinese.
| Data Transfer Rate | Up to 320 MB/sec |
|---|---|
| Memory Support | 256 MB (DDR2) |
| Host Interface (4/Di/Si) | 64-bit/66 MHz PCI |
| Host Interface (4e/Di/Si) | PCI Express x8 |
| Supported RAID Levels | 0, 1, 5, 10, 50 |
| Max Cable Length (LVD 320M SCSI) | 12 meters (39' 4") |
| Max Devices (LVD 320M SCSI) | 15 |
The controller supports Microsoft Windows 2000 Server/Advanced Server, Windows Server 2003 Standard/Enterprise/Small Business, Novell NetWare, and RedHat Linux.
Yes, for PERC 4/Di and 4e/Di, you can use a mixed mode where Channel 0 is RAID and Channel 1 is SCSI, provided the platform supports it.
Changing the mode will delete all data on the hard drives. You must manually clear the RAID configuration before changing modes.