The Dell W-IAP274 and W-IAP275 Instant Access Point (IAP) are environmentally hardened, outdoor rated, dual-radio IEEE 802.11ac wireless access points (AP). These Instant access points use MIMO (Multiple-Input, Multiple-Output) technology and other high-throughput mode techniques to deliver high-performance, 802.11ac 2.4 GHz and 5 GHz functionality while simultaneously supporting existing 802.11a/b/g/n wireless services.
The Dell Networking W-IAP270 Series Outdoor Instant Access Point Installation Guide covers the W-IAP274 and W-IAP275 outdoor Instant Access Points. It describes package contents, hardware views, LED status, the USB console port, Ethernet ports, reset button, AC power interface, grounding point, and external antenna connectors.
The guide also explains site selection, RF interference sources, mounting kit options, grounding the IAP, and safety and regulatory compliance. It notes that the access points require Dell Instant 4.1 or later and that mounting kits are sold separately.
| Wireless standards | IEEE 802.11a/b/g/n/ac |
|---|---|
| Ethernet ports | Two RJ-45 Gigabit Ethernet ports (WAN and LAN) |
| PoE | 802.3at Power over Ethernet (PoE), 48 VDC nominal |
| AC power | 100 - 240 VAC |
| Console settings | 9600 baud, 8 data bits, no parity, 1 stop bit, no flow control |
| External antenna connectors | Six N-type female connectors |
| Grounding wire | #8 AWG |
The package includes a W-IAP274 or W-IAP275 access point, cable glands, a copper lug, an M4x6 screw, a USB console cable, and related documentation.
Use 9600 baud, 8 data bits, no parity, 1 stop bit, and no flow control.
Power off the IAP, press and hold the reset button, power it on while holding the button, and release it when the system LED flashes.
The IAP supports AC power in the range of 100 - 240 VAC.