The Dell Inspiron 20 3000 Series Service Manual provides information on how to disassemble the Inspiron 20-3059 model.
This Dell service manual covers the Inspiron 20–3059 all-in-one desktop (regulatory model W15B). It provides safety notices, recommended tools, and step-by-step removal and replacement procedures for internal components.
Procedures include the stand, optical drive, rear cover, hard drive, memory module, wireless card, control button board, microphone, system board shield, camera, coin-cell battery, fan, heat sink, speakers, system board, display cable, display assembly, and rubber foot. It also describes the BIOS setup program, forgotten-password clearing, and CMOS memory clearing. This manual is written in Spanish.
Turn on or restart the computer, wait for the F2 prompt to appear with the DELL logo during POST, and press F2 immediately.
Locate the password jumper (PSWD) on the system board, remove the jumper connector from the password jumper pins, wait 5 seconds, and reinstall the connector in its original location.
Locate the CMOS jumper (CMCL R2) on the system board, move the jumper connector from the password jumper pins to the CMOS jumper pins, wait 5 seconds, and return the connector to its original location.
Save and close all open files, shut down the computer, disconnect it and all connected devices from power outlets, and disconnect all cables and peripherals.