PerkinElmer 2470 and 2480 WIZARD2® In Vitro Diagnostic Reagents, For Use with Software Version 2 User Manual.
This Portuguese user manual describes how to operate the user interface of the PerkinElmer 2470 and 2480 WIZARD2 in vitro diagnostic instrument with software version 2. The instrument detects and counts gamma radiation emitted by solid and liquid samples prepared by adding a radioactive reagent for later clinical applications, and it is intended to be used by trained laboratory technicians. Controls can be clicked by touch screen, mouse or keyboard. The manual notes that differences between the 2470 and 2480 user interfaces are mentioned where they occur, and that the separate instrument manual covers the hardware description and regulatory information.
The chapters cover starting and shutting down the instrument, the Enhanced Security option with FDA 21 CFR Part 11, the main window and messages, barcode identification and rack loading, automatic measurement, conveyor operations, STAT and manual measurement, semiautomatic counting, Protocol Manager, Isotope Manager, system parameters, IPA limits, instrument diagnostics and the Wizard Data Viewer, including descriptions of its data fields. Contact addresses and compliance markings are listed at the end. This manual is written in Portuguese.
| Software version covered | Version 2 |
|---|---|
| 2470-0010 configuration | 1 detector, 550 samples |
| 2470-0020 configuration | 2 detectors, 550 samples |
| 2470-0150 configuration | 5 detectors, 1000 samples |
| 2480-0010 configuration | 1 detector 3'', 1000 samples |
| Startup time | About one minute |
| Power switch location | At the back of the instrument |
It detects and counts gamma radiation emitted by solid and liquid samples that were prepared by adding a radioactive reagent for later clinical applications.
It covers software version 2 of the 2470 and 2480 WIZARD2.
Startup of the computer and the instrument takes about one minute, with "Initializing" messages shown in the main window.
The switch is located at the back of the instrument; the software then starts automatically.