The Edifier C2XD is a multimedia active speaker with E.I.D.C. function, which can automatically adapt to multiple audio sources and protect the speaker and ears.
This user manual covers the Edifier C2XD multimedia active speaker system, which includes an amplifier unit, a subwoofer, and two satellite speakers. It provides connection diagrams, control descriptions, operating instructions for PC, AUX, and Optical input modes, and remote control functions.
The document also includes safety precautions, a packing list, technical specifications, and troubleshooting guidance for common issues such as no sound, one-sided audio, and remote control problems. This manual is written in Chinese.
| Amplifier output power (satellite channels) | RMS 9W x 2 (THD+N=10%, f0=1KHz) |
|---|---|
| Amplifier output power (subwoofer channel) | RMS 35W (THD+N=10%, f0=80Hz) |
| Signal-to-noise ratio | ≥ 85dBA (THD+N=1%) |
| Input sensitivity (satellite channels, AUX/PC) | 450±50mV (THD+N=1%, f0=1KHz) |
| Input sensitivity (subwoofer channel) | 150±50mV (THD+N=1%, f0=80Hz) |
| Woofer unit | 6.5 inches (outer diameter 166mm) |
| Midrange unit | 3 inches (outer diameter 78mm) |
| Tweeter unit | 3/4 inch silk dome |
| Audio input ports | PC, AUX, Optical |
| Transformer output power | 60W 18V |
| Amplifier dimensions | 250(W) x 78(H) x 255(D) mm |
| Subwoofer dimensions | 288(W) x 232(H) x 242(D) mm |
| Satellite speaker dimensions | 130(W) x 90(H) x 180(D) mm |
Press the INPUT button on the amplifier front panel to select PC, AUX, or Optical (OPT) mode. The corresponding indicator light will illuminate.
First check that the connections between speakers are secure. Then try connecting a different audio source to determine whether the issue is with the original source.
Check that the power plug is connected and the power switch is on, verify the source and cables are working, ensure volume is not set to minimum, and try disconnecting power and restarting.
Remove the battery compartment cover, insert a CR2025 coin cell battery correctly, and close the compartment. The battery is pre-installed from the factory with an insulating film that must be removed before first use.