testo 622 is a scientific ambient monitor that can measure temperature, humidity, air pressure, wind speed, wind direction, precipitation, illuminance and other environmental parameters. It has the following features: 1. High accuracy: testo 622 uses high-precision sensors to ensure high measurement accuracy. 2. Multi-function: testo 622 can measure multiple environmental parameters to meet the needs of different users. 3. Portability: testo 622 is small in size, light in weight and easy to carry. 4. Easy to use: testo 622 is easy to operate, even for beginners.
The testo 622 Scientific Ambient Monitor instruction manual covers safety and environmental information, performance description, technical data, product description, first steps, operation, maintenance, and troubleshooting. The manual includes German, English, French, and Spanish sections.
It describes the device as a display unit for observing temperature, humidity, and absolute pressure in laboratories during test setups and calibrations. It also explains wall mounting, battery installation, date and time setup, limit values, settings, measurements, and the flow diagram. This manual is written in German.
| Measurement parameters | Temperature, humidity, absolute pressure |
|---|---|
| Temperature measurement range | -10 to +60 °C |
| Humidity measurement range | 0 to 100 %RH (non-condensing) |
| Absolute pressure measurement range | 300 to 1200 hPa |
| Temperature accuracy | ±0.4 K + 1 digit |
| Humidity accuracy | ±2 %RH + 1 digit at 25 °C (10...90 %), ±3 %RH remaining range |
| Absolute pressure accuracy | ±3 hPa + 1 digit |
| Battery type | 4 x AA |
| Battery life | At least 12 months |
| Housing material | ABS |
| Protection class | IP 30 |
| Weight | Approx. 240 g without batteries |
| Dimensions | 185 x 105 x 36 mm; 185 x 112 x 47 mm with stand clip unfolded |
| Warranty | 24 months |
It is a display device for observing environmental conditions in laboratories during test setups and calibrations.
It is powered by four AA batteries or rechargeable batteries.
Date and time must be set.
The distance between the upper and lower drill holes is 63 mm.