RTLA absolute linear encoder tape scale from Renishaw combines ±5 µm/m accuracy with the ruggedness of stainless steel. Two versions are available; self-adhesive RTLA-S and RTLA for use with the revolutionary FASTRACK track system from Renishaw.
The FASTRACK and RTLA-S system combines a hardened stainless steel tape scale (RTLA or self-adhesive RTLA-S) with the FASTRACK guide rail system for high-accuracy absolute linear encoding. The scale offers ±5 µm/m accuracy at 20 °C, a low thermal expansion coefficient of 10.6 µm/m/°C, and is read by Renishaw's RESOLUTE absolute readheads providing 1 nm resolution and up to 100 m/s speed.
RTLA-S uses a self-adhesive backing for direct mounting with a single datum clamp, while RTLA is installed in the FASTRACK guide rails which allow quick scale replacement and very low hysteresis. Both versions support scale lengths up to 10 m (RTLA-S) or 25 m (FASTRACK), and are suited for applications such as flat panel display manufacturing, linear motors, large CMMs, and machines requiring independent thermal expansion.
| Accuracy | ±5 µm/m @ 20 °C |
|---|---|
| Thermal expansion coefficient | ~10.6 µm/m/°C |
| Storage temperature | -20 °C to +70 °C |
| Operating temperature | 0 °C to +70 °C |
| Humidity rating | Up to +40 °C, 95% RH non-condensing |
| Operating acceleration | 500 m/s² |
| Non-operating shock | 1000 m/s², 6 ms, ½ sine |
| Operating vibration | 100 m/s² max @ 55–2000 Hz |
| Mass (FASTRACK) | 24 g/m |
| Mass (RTLA) | 12.5 g/m |
| Mass (RTLA-S) | 12.9 g/m |
| Minimum FASTRACK length | 100 mm |
| Maximum FASTRACK length | 25 m |
| Maximum RTLA length | 10 m |
| Maximum RTLA-S length | 10 m |
| Form factor (FASTRACK) | 0.4 mm × 18 mm (H × W) |
| Form factor (RTLA-S >300 mm) | 0.4 mm × 8 mm (H × W) |
| Resolution | 1 nm |
| Maximum speed | 100 m/s |
| Sub-Divisional Error (SDE) | ±40 nm |
| Jitter | 10 nm RMS |
| Rideheight tolerance | ±150 µm |
| Yaw/pitch/roll tolerance | ±0.5° |
The RTLA-S scale provides ±5 µm/m accuracy at 20 °C.
The RTLA-S scale expands at approximately 10.6 µm/m/°C.
The system supports a maximum speed of 100 m/s at all resolutions.
Yes, the scale can be cut to length using a guillotine for easy customization.