CMM5042 is an embedded CO sensor module with high linear output characteristics, wide driving voltage range, internal temperature compensation circuit and self-diagnostic control signal input port.
The Figaro CMM5042 is an embedded carbon monoxide sensor module built around the electrochemical TGS5042 sensor. It is intended for home and commercial CO alarms, automatic ventilation-fan control, and CO monitoring of gas boilers and oil/LPG heaters.
The module gives a linear analog voltage output proportional to CO concentration and includes built-in temperature compensation plus a TEST-pin self-diagnosis input. It measures 56 x 29 x 22 mm and weighs about 19 g. This manual is written in Chinese.
| Sensor | TGS5042 (electrochemical sensor) |
|---|---|
| Detection range | 0 ~ 800 ppm CO |
| Input voltage | 2.5 ~ 5.3 V DC |
| Signal output | 0 ~ 2 V DC |
| Warm-up time | <= 30 s |
| Operating humidity | 5 ~ 95 %RH |
| Response time (T90) | <= 60 s |
| Dimensions | 56 x 29 x 22 mm |
| Weight | about 19 g |
It uses the Figaro TGS5042 electrochemical sensor.
The detection range is 0 to 800 ppm CO.
Connect the TEST pin to GND for 5 seconds, then release; normal operation is indicated when the output exceeds 3.0 V and then drops to 1.5 V.