SanDisk SDHC card initialization timing
An SD boot issue was observed for 3 of 10 SanDisk SDHC Class 4 4GB cards when the host power-on reset active timeout was shortened from 200ms to 33ms. Manual reset booting worked, and clock and command signals were proper, but no DAT0 activity indicated the card was not initialized.
The host and card share a 3.3V rail whose power-up timing meets the SD interface specification. Powering the card about 1 second before the host made DAT0 active. SanDisk documentation states SDHC cards can initialize slowly, with a maximum ACMD1-to-ready-after-power-up value of 500ms. Possible solutions are lengthening the host power-on reset timeout or polling the card until initialized, for example for 1 second.
| Capacity | 4GB |
|---|---|
| Speed class | Class 4 |
| Power supply | 3.3V |
| ACMD1 to ready after power-up | 500ms maximum |
| Host power-on reset timeout tested | 200ms to 33ms |
Some SanDisk SDHC cards do not initialize, and no activity appears on the DAT0 line.
Power the card about 1 second before the host, lengthen the host power-on reset timeout, or poll the card until it is initialized.
The maximum value is 500ms.