This document is about the operating and servicing manual of Hewlett Packard Model 500B Electronic Frequency Meter and Model 500C Electronic Tachometer Indicator
The HP Model 500B is an electronic frequency meter that measures alternating-voltage frequency from 3 cps to 100 kc over nine ranges. It provides an expanded scale for a 10% or 30% portion of a selected range, a RECORDER jack for a 1 ma recorder, and a PULSE output for applications such as stroboscope triggering and FM measurement. The manual covers operation, theory of operation, and maintenance.
The Model 500C electronic tachometer indicator uses the same specifications, circuit, and construction as the 500B except for meter calibration; its speed range is 180 rpm to 6,000,000 rpm. The document also describes tachometer generators, photoelectric tachometry, power transformer conversion for 115/230-volt operation, troubleshooting, and adjustments.
| Frequency range | 3 cps to 100 kc |
|---|---|
| Frequency ranges | Nine ranges: 10, 30, 100, and 300 cps; 1, 3, 10, 30, and 100 kc |
| Input sensitivity | 0.2 V rms minimum for sine waves; 1.0 V minimum for positive pulses; 250 V peak maximum |
| Input impedance | Approximately 1 megohm shunted by 40 pF |
| Power | 115/230 V, 50/1000 cps, approximately 110 W |
| Cabinet weight | Net 17 lbs; shipping weight 22 lbs |
| Recorder output | Direct connection to 1 mA, 1400 ohm ±100 ohm recorder |
| 500C speed range | 180 rpm with non-multiplying transducer to 6,000,000 rpm |
| 500C speed ranges | 600, 2,000, 6,000, 20,000, 60,000, 200,000, 600,000, 2,000,000, and 6,000,000 rpm |
The Model 500B measures from 3 cps to 100 kc.
The 500C covers 180 rpm, with a non-multiplying transducer, up to 6,000,000 rpm.
The jack can directly connect to a 1 ma, 1400 ohm ±100 ohm recorder.
The bare wire jumpers are removed from the terminal strip beneath the power transformer, and a new jumper is inserted as shown in the manual.