Introduced the general introduction, features, specifications and operating instructions of the model 765 digital indicating panel thermometer.
The JENCO 765 is a digital indicating panel thermometer described in the manual as a high performance industrial grade readout for types K, J, T, and E thermocouple sensors and 3-wire RTD (PT-100). Thermocouple gain, linearization, and cold junction are automatically compensated by internal electronic circuits, and the temperature scale can be changed by an internal jumper without re-calibration.
The operation manual covers initial inspection, specifications, panel mounting, analog voltage output, wiring diagrams for thermocouple and RTD models, the °F jumper, and warranty terms. It also describes a 1 mV per display count analog output and a HOLD function for freezing the display.
| Sensor Types | K, J, T, E thermocouples and 3-wire RTD (PT-100) |
|---|---|
| Analog Output | 1 mV per display count (linearized) |
| Analog Output Accuracy | +0.2% of reading, +1 mV |
| Display | 0.56-inch high efficiency LED |
| Power | 115V AC or 230V AC, 50/60 Hz |
| Dimensions | 48mm x 96mm x 110mm |
| T/C Resistance | 100 (min) |
It supports types K, J, T, and E thermocouple sensors and 3-wire RTD (PT-100).
Connect the HOLD terminal to the ANALOG GND terminal.
Yes. The manual states the scale can be changed with an internal jumper without re-calibration.
It can be used with 115V AC or 230V AC, 50/60 Hz.