User manual for the Jenco pH 619 pocket meter covering setup, calibration, operation modes, troubleshooting, and specifications.
This operation manual provides step-by-step instructions for using the Jenco pH 619 pocket meter. It covers initial setup including battery replacement and electrode soaking, calibration procedures using standard buffers, operation modes, and troubleshooting common error displays. The manual also includes technical specifications and warranty information for the device.
The device features a graphical LCD display, five operation modes (Measure, Calibration, Hold, Buffer Select, and Electrode Efficiency), and automatic temperature compensation. It is designed for accurate pH and temperature measurements with a pH range of 0.00 to 14.00 and temperature range of -10.0 to 100.0°C. The meter automatically turns off after 30 minutes of inactivity and is powered by four LR44 batteries with a 200-hour life.
| Battery Type | LR44 x 4 |
|---|---|
| Battery Life | 200 Hours |
| Display | 98x64 graphic LCD |
| Case Rating | IP67 water-tight case |
| Weight | 105 g |
Calibrate using one, two, or three point calibration with standard buffer solutions. Press the 'Cal' key to initiate calibration, wait for a stable reading, then press 'Enter' to save the point.
The pH reading is over 14.00. Recalibrate or replace the electrode if the reading is consistently out of range.
The battery life is approximately 200 hours, and the meter automatically turns off after 30 minutes of no key activity.
The meter is covered for 1 year and the electrode for 6 months from the date of purchase.