This document is the operation manual of Jenco Model 3331 Microcomputer Based Conductivity/Resistivity Transmitter. It introduces the features and characteristics of the product, including mounting, measurement mode, setting mode and so on.
The Jenco 3331 is a microprocessor-based conductivity/resistivity transmitter in a watertight 1/8 DIN case, designed for use in laboratories and process control applications. It displays conductivity/resistivity or temperature status on one large LCD screen and performs a self-diagnostic routine every time the unit is turned on.
The manual covers panel mounting, the front panel keys and LCD screen, rear connectors, measure and setting modes, conductivity/resistivity calibration, the isolated 4-20mA output, error display and troubleshooting, specifications, and warranty information.
| Cell Constant | 0.01, 0.1, 1.0; 2-wire |
|---|---|
| Reference Temperature | 25.0 °C, factory set |
| Temperature Coefficient | 2.00 or 0.00%, user selectable |
| Current Output Range | 4 to 20 mA (isolated) |
| Maximum Load | 500 ohm |
| Isolation Voltage | 500VDC |
| Power | 100VAC to 240VAC, 50/60Hz |
| Ambient Temperature Range | 0.0 to 50.0 °C |
| Case | IP65, 1/8DIN case, depth 90mm |
| Weight | 290g |
The model 3331 can be used with 100~240V AC at 50/60 Hz.
In Measure mode, press the UP key and ENTER key at the same time.
The load impedance must be less than 500 Ohms.
Jenco warrants the product for a period of 1 year from the date of purchase.