PumaTrack is a MMA cold applied surface treatment for road markings that is engineered to achieve the highest levels of durability, adhesion and colour stabillity. PumaTrack is the ideal application for cycle tracks and walk ways.
PumaTrack by Hitex is a manually rollable MMA cold applied surface treatment intended for cycle tracks and walkways. It comprises an MMA binder system, lead/heavy metal free pigments, aggregates, and fillers; standard colors are red, green, yellow, and blue, with other colors available on request. The document lists typical uses, application method, technical data, packaging and storage, and health and safety information.
The appendix also includes a CM Primer data sheet for priming metal and concrete substrates and a proposed method statement for installation and quality control of the PumaTrack rollable road surfacing system. The method statement covers quality control, suitability of the road surface, and traffic management.
| Typical coverage rate | 4.6 lb/yd² (2.5 kg/m²) |
|---|---|
| Pot life | 5–15 minutes |
| Curing time | 10–30 minutes |
| Road surface temperature range | 32–104°F (0–40°C) |
| Packaging | 22 lb (10 kg) or 44 lb (20 kg) pails |
| Shelf life | 6 months in a cool, dry place |
Typical uses include cycle routes, paths and walkways, and smaller-scale works such as car parks and factory markings.
Curing is typically 10 to 30 minutes, depending on ambient temperature and catalyst dosage.
Standard colors are red, green, yellow, and blue; other colors are available on request.
It can be applied by squeegee and finished with a roller, or by hand screed; a catalyst is required for curing.