Provides an overview of the RF matching procedure.
This guide explains how to design RF matching networks for EFR32 Series 1 chips operating in sub-GHz bands. It covers lowpass filters, baluns, and impedance transformation networks to achieve desired TX power, RX sensitivity, and regulatory compliance. The document references external ceramic baluns and IPD solutions for compact designs. Layout rules from AN928.1 are recommended to avoid detuning caused by PCB parasitics.
The guide provides component values for various frequencies and power levels, with tables for 169 MHz to 950 MHz. It recommends Chebyshev filters with 0.25–0.5 dB ripple for most applications and includes design notes for inductor types and performance trade-offs.
| Frequency Bands Covered | 169 MHz to 950 MHz |
|---|---|
| Recommended Filter Type | Chebyshev with 0.25–0.5 dB passband ripple |
| Inductor Types | Wire-wound (e.g., Murata LQW15A, CoilCraft 0402CS) or multi-layer (e.g., Murata LQG15HS) |
This guide provides a description of the RF matching for EFR32 chip variants that provide sub-GHz operation, including design procedures for lowpass filters, baluns, and impedance transformation networks.
Silicon Labs typically uses Chebyshev lowpass filter networks with 0.25–0.5 dB passband ripple for a good trade-off between flat response and stopband attenuation.
Wire-wound inductors like Murata LQW15A or CoilCraft 0402CS are preferred for best performance, but multi-layer inductors like Murata LQG15HS can be used with a small performance trade-off.