A design guide that explains PCB layout practices for achieving optimal RF performance with Silicon Labs EFR32 Series 1 wireless MCUs.
This guide provides reference schematics, PCB layout recommendations, and a summary table of key design principles for the EFR32 Series 1 wireless MCU family. It covers both the 2.4 GHz and sub‑1 GHz frequency bands, describing matching network types, component placement, and grounding strategies.
The document also includes detailed layout rules such as layer stack‑up recommendations, ground‑plane continuity, via placement, and 50 Ω grounded coplanar line dimensions, helping designers minimize parasitic effects and achieve the best possible RF performance. This manual is written in Chinese.
| Maximum output power (sub‑1 GHz) | +19.5 dBm |
|---|---|
| Grounded coplanar line frequency | 2.4 GHz, sub‑GHz |
| Coplanar line thickness (T) | 0.018‑0.035 mm |
| Height between top and inner layer (H) | 0.325 mm |
| Gap between signal and ground (G) | 0.25 mm |
| Signal width (W) | 0.45 mm |
L1 should be placed as close as possible to the EFR32 IC’s 2G4RF_IOP pin (pin 17) to reduce series parasitic inductance.
Yes, the top layer should have as much continuous solid ground metal as possible, with many vias to ensure low‑impedance return paths.