Key facts
- Brand
- Silicon Labs
- Model
- EFR32 Series 1
- Category
- Other
- Documents
- 2
- Languages
- ZH · EN
- Last added
- 2026-10-06
Start here

Silicon Labs EFR32 Series 1 Layout Design Guide
This guide provides reference schematics, PCB layout recommendations, and a summary table of key design principles for the EFR32 Series 1 wireless MCU family. It covers both the 2.4 GHz and sub‑1 GHz frequency bands, describing matching network types, component placement, and grounding strategies.
The document also includes detailed layout rules such as layer stack‑up recommendations, ground‑plane continuity, via placement, and 50 Ω grounded coplanar line dimensions, helping designers minimize parasitic effects and achieve the best possible RF performance. This manual is written in Chinese.
Silicon Labs EFR32 Series 1 specifications
| Maximum output power (sub‑1 GHz) | +19.5 dBm |
|---|---|
| Grounded coplanar line frequency | 2.4 GHz, sub‑GHz |
| Coplanar line thickness (T) | 0.018‑0.035 mm |
| Height between top and inner layer (H) | 0.325 mm |
| Gap between signal and ground (G) | 0.25 mm |
| Signal width (W) | 0.45 mm |
All Silicon Labs EFR32 Series 1 documents by type
How to use the product for one specific task, with worked examples.
Questions answered in these manuals
What is the recommended placement for the first matching network inductor (L1) at 2.4 GHz?
L1 should be placed as close as possible to the EFR32 IC’s 2G4RF_IOP pin (pin 17) to reduce series parasitic inductance.
Is a continuous ground plane required on the top layer for multi‑layer boards?
Yes, the top layer should have as much continuous solid ground metal as possible, with many vias to ensure low‑impedance return paths.
What is the purpose of this guide?
This guide provides a description of the RF matching for EFR32 chip variants that provide sub-GHz operation, including design procedures for lowpass filters, baluns, and impedance transformation networks.
What filter type is recommended?
Silicon Labs typically uses Chebyshev lowpass filter networks with 0.25–0.5 dB passband ripple for a good trade-off between flat response and stopband attenuation.
