The Fleck 2510 Service Manual provides installation, operation, and maintenance instructions for the Fleck 2510 water softener. The manual includes detailed descriptions of the unit's design, operation, and maintenance.
This service manual provides detailed instructions for installing, starting up, and maintaining the Fleck 2510 water softener. It covers timer programming for models 3200 and 3210, regeneration cycle setup, valve and powerhead assembly, and troubleshooting. The manual includes job specification sheets for customizing unit settings based on water hardness, tank size, and system type. It also addresses electrical and plumbing requirements, including voltage compatibility and drain line specifications.
| Water Pressure Requirement | Minimum 20 pounds (1.4 bar) |
|---|---|
| Electrical Supply | Uninterrupted alternating current (A/C) |
| Maximum Water Pressure | 125 psi (8.6 bar) |
| Maximum Water Temperature | 110°F (43°C) |
| Drain Line Flow Control (Residential) | Minimum 1/2 inch (13 mm) |
A minimum of 20 pounds (1.4 bar) of water pressure is required for regeneration valve to operate effectively.
An uninterrupted alternating current (A/C) supply is required.
Water temperature is not to exceed 110°F (43°C).
The pipe size for residential drain line should be a minimum of 1/2 inch (13 mm).