This manual introduces the functions and usage methods of products in FLECK 5800/5810/5812 XTRi (CONNECTED XTR2) SERVICE MANUAL pentair.com JOB SPECIFICATION SHEET, mainly including Job Number, Model Number, Water Hardness, Capacity Per Unit, Mineral Tank Size, Salt Setting per Regeneration, Regenerant Flow, Meter Size, System Type, Cycle Settings, Drain Line Flow Control, Brine Line Flow Control, Injector Size#, Battery Ins etc.
This service manual provides detailed instructions for installing, operating, and troubleshooting the FLECK 5800/5810/5812 XTRi water softener controllers. It includes setup guidelines, electrical requirements, plumbing specifications, and safety precautions. The document also covers controller programming, regeneration cycles, and diagnostic procedures for field technicians. Technical specifications such as pressure, temperature, and voltage limits are provided for proper system operation.
| Minimum Pressure | 20 psi (1.4 bar/138 kPa) |
|---|---|
| Maximum Pressure | 125 psi (8.61 bar/861 kPa) |
| Minimum Water Temperature | 32°F (0°C) |
| Maximum Water Temperature | 110°F (43°C) |
| Minimum Ambient Temperature | 32°F (0°C) |
| Maximum Ambient Temperature | 120°F (62°C) |
| Maximum Humidity | 1% |
| Input Voltage | 100-240 VAC |
| Input Frequency | 50/60 Hz |
| Output Voltage | 12 VDC |
| Output Current | 2.0 amps |
| Maximum Altitude | 2,000 meters |
Maximum pressure is 125 psi (8.61 bar/861 kPa).
Minimum water temperature is 32°F (0°C).
Maximum ambient temperature is 120°F (62°C).