This manual provides detailed information on the configuration, usage, performance parameters, connection methods, etc. of the 6634C vibration amplifier
This manual provides detailed instructions for operating the Endevco Model 6634C Vibration Amplifier, a microprocessor-based signal conditioning instrument for vibration testing. It covers configuration, input/output settings, alarm functions, and RS-232 interface operations. The device supports various sensor types and offers programmable outputs for acceleration, velocity, and displacement. Maintenance and troubleshooting procedures are also included.
The amplifier can be used independently or in racks up to six units. It accepts inputs from external calibration sources, piezoelectric accelerometers, or velocity coils, and outputs signals in engineering units with configurable full-scale ranges.
| Input Sources | External Calibration Source, Single Ended Piezoelectric (PE) Accelerometer, Differential PE Accelerometer |
|---|---|
| Output Signals | Broadband acceleration, Acceleration (50 mV/g pk), Velocity (100 mV/ips pk), Displacement (200 mV/mil pk-pk) |
| Power Supply | 45 to 440 Hz AC, 90-240 VAC |
| DC Output Range | Acceleration: 2g pk to 200 g pk, Velocity: 1.0 ips pk to 100 ips pk, Displacement: 0.5 mils to 50 mils pk-pk |
| AC Output Range | Acceleration: 2g pk to 200 g pk, Velocity: 1.0 ips pk to 100 ips pk, Displacement: 0.5 mils to 50 mils pk-pk |
The 6634C supports External Calibration Source, Single Ended Piezoelectric (PE) Accelerometer, and Differential PE Accelerometer.
It produces Broadband acceleration, Acceleration (50 mV/g pk), Velocity (100 mV/ips pk), and Displacement (200 mV/mil pk-pk).
It requires 45 to 440 Hz AC input power, 90-240 VAC, with an internal switch for selection.
Yes, up to six units can be mounted in an optional 19" rack (Endevco P/N 4948, 5" high).