This document is a guide for the installation and operation of the product, including power source connection, receiver connection, video connection, printer parallel interface, serial RS-232 interface, etc. It also covers operating controls and code structures, technical specifications, troubleshooting, etc.
The WAVECOM W 4010 is a decoder designed for use with shortwave receivers. It features a continuously variable bandpass filter adjustable from 10 Hz to 2300 Hz and a squelch circuit to manage signal amplitude and interference. The device supports various communication modes including CW, ARQ, and packet-radio.
| Power Consumption | 0.5 A |
|---|---|
| Power Source | 12 to 14 Volt |
| Recommended Supply | 2 to 3 Ampere |
| Filter Bandwidth | 10 Hz to 2300 Hz |
| Filter Attenuation | over 27 dB |
| Default Serial Baud Rate | 300 baud |
The decoder requires a regulated 12 to 14 Volt power source with the red wire to the positive pole and the blue to the minus pole.
Yes, by opening the case and changing jumper #3 from the left-hand position to the right-hand position.
Select module A, push F2 to access the menu, and use F1 to configure the baud rate to 300, 600, 1200, 2400, 4800, or 9600 Baud.