This document describes how to use and configure the PLM smartplug demonstration board, as well as provides a detailed description of its hardware components. The demonstration board is based on the STM32F103CB microcontroller, the ST7540 PLM module, and the STPM01 mono-phase energy metering IC. It allows monitoring the energy consumption of a mains plug and controlling any kind of load through a relay. The board can send voltage, current, power, active energy, and output status to a PLM data concentrator via a power line communication network. A specific cabling scheme is required to control a load supplied by the monitored mains plug.
The document serves as a guide to help users fully utilize the PLM smartplug demonstration board within a network involving other smartplug boards and a data concentrator. It details how to configure the hardware, including buttons, LEDs, jumpers, and components, while providing descriptions of power line communication configuration and commands.
Based on the STM32F103CB microcontroller, ST7540 PLM module, and STPM0O1 energy metering IC, this board functions as a smartplug node to monitor mains plug energy consumption and control loads via a relay. The guide covers specific cabling schemes for controlling monitored loads and explains how to transmit voltage, current, power, active energy, and output status data asynchronously or on request through the PLC network.
| Microcontroller | STM32F103CB |
|---|---|
| PLM Module | ST7540 |
| Energy Metering IC | STPM0O1 |
| PLC Speed | up to 4.8 kbps |
The purpose is to help the user fully use the PLM smartplug demonstration board in a network with other smartplug boards and a data concentrator.
The board must be used only by expert technicians due to high voltage (220 Vac), and a mains insulation transformer is mandatory for debugging or testing.