Extech RHT10 Humidity Temperature Datalogger User's Guide

Congratulations on your purchase of the Relative Humidity and Temperature Datalogger. This datalogger measures and stores up to 16,000 relative humidity and 16,000 temperature readings over 0 to 100%RH and -40 to +70°C (-40 to +158°F) measurement ranges. The user can easily configure the logging rate, high/low alarm and start-mode, and download the stored data by plugging the module into a PC's USB port and running the supplied PC software. Relative Humidity, Temperature and Dew Point data can then be graphed, printed and exported to other applications. GPP (grains per pound) data can be viewed using the optional RHT10-SW software. The data logger is supplied with a long-life lithium battery, which can typically allow logging for one year. This meter is shipped fully tested and calibrated and, with proper use, will provide years of reliable service.


Extech RHT10 Humidity Temperature Datalogger User's Guide - cover page
Brand
EXTECH
Category
Other Electronics
Document type
User Manual
Language
English
Pages
12
File format
PDF
File size
291 KB
Published
01 August, 2012
Updated
29 September, 2023
Model
RHT10
MD5 checksum
7FCDCD2808A1E50DA63B8B1CC7CFE122

About this manual

The Extech RHT10 is a handheld data logger designed to measure and store up to 32,000 readings (16,000 temperature and 16,000 relative humidity). It features selectable sampling rates from 2 seconds to 24 hours, user-programmable alarm thresholds for high/low limits, and status indication via Red/Yellow and Green LEDs. The device is powered by a long-life lithium battery capable of logging for approximately one year under typical conditions.

The manual details the setup process, including installing the supplied Windows PC software and USB drivers. Users can configure logging parameters such as sample points and LED flash cycles to conserve battery power. Data can be downloaded via a USB interface, viewed graphically, and exported in various formats including Excel, Text, or Bitmap files.

What's inside

  • Introduction
  • Features
  • Installing the Graphing Software
  • Installing the USB Driver
  • Running the Graphing Software
  • Logger Setup
  • Data Download
  • LED Status Guide
  • Specifications

Specifications

Memory Capacity32,000 readings (16,000 temperature and 16,000 humidity)
Relative Humidity Range0 to 100%RH
Temperature Range-40 to +70°C (-40 to +158°F)
Sampling Rate2s to 24hr
Battery Type3.6V Lithium (1/2 AA)
Operating Temperature-35 to 80°C (-31 to 176°F)
Battery Life1 year (typ.)

Frequently asked questions

What is the maximum number of readings the RHT10 can store?

The device has memory for up to 32,000 readings.

How long does the battery typically last?

The lithium battery can typically allow logging for one year.

Can I view Grains per pound (GPP) data with the standard software?

No, GPP data is only available using the optional RHT10-SW software.

Download PDF (291 KB)

More EXTECH Manuals


View all EXTECH manuals →