The Axis Outdoor Antenna Kit 211W Installation Guide describes installing the outdoor antenna on a mast or wall. It recommends clear line of sight, mounting at the same height as the access point’s antenna, and using an outdoor access point; a lightning arrester is strongly recommended.
The guide covers unpacking, wall and mast mounting, and attaching the antenna cable. It also lists electrical, mechanical, environmental, and cable specifications, including frequency, gain, connector type, weight, operating temperature, and typical range.
| Frequency | 2400 - 2500 MHz |
|---|---|
| Gain | 6 dBi typical |
| Polarization | Vertical |
| Impedance | 50Ω nominal |
| VSWR | 1.5 max. |
| Length including connector | 456 mm |
| Connector | N-Type Female |
| Mounting | 5 cm (2”) maximum diameter mast with U-bolts |
| Weight | ≤ 350 g (0.77 lbs) |
| Operating temperature | -40 to 70° C (-40 to 158° F) |
| Maximum survival wind speed | 240 kph (150 mph) |
| Water proof | IPX5 |
| Typical range | 300 m (in a clear line of sight) |
| Cable length | 3 m |
It can be installed either on a mast or on a wall.
The box contains the outdoor antenna with a pole mounting bracket and one antenna cable.
It is strongly recommended to use a lightning arrester when installing the outdoor antenna.
Do not operate the outdoor antenna when closer than 0.2m to a person.