TP-LINK's PoE Supplier Adapter TL-POE150S fully complies with IEEE 802.3af standard. No need to buy a PoE switch, you can use the existing non-PoE switch or non-PoE router to connect PoE devices with the help of TL-POE150S. The PoE Supplier Adapter TL-POE150S can work with all IEEE 802.3af PoE compliant PDs (Powered Devices) or PoE Receiver Adapters, such as TP-LINK's TL-POE10R, or other equivalent products, to expand your network to where there are no power lines or outlets, where you wish to fx devices like Wireless Access Points, IP Cameras or IP Phones, etc. TL-POE150S PoE Supplier Adapter Delivers power and data over the same cable up to 100 meters Auto-determine the necessary power requirements Cost Saving, no power cabling for Ethernet network device Complies with IEEE802.3af standard Cost Saving, no power cabling for Ethernet network device Delivers power and data over the same cable up to 100 meters Advanced Auto-Sensing Algorithm enables providing power with 802.3af PD Supports power classifcation, Auto-determine the necessary power requirements High Safety with Short Circuit Protection Plug & Play installation, requires no confguration External 48VDC power supply
The TL-POE150S PoE Supplier Adapter delivers power and data over a single Ethernet cable up to 100 m, allowing non‑PoE switches or routers to power IEEE 802.3af compliant devices such as wireless access points, IP cameras, and IP phones. It complies with the IEEE 802.3af standard and features an auto‑sensing algorithm that automatically determines the required power for each powered device.
The adapter requires an external 48 VDC power source and connects via one RJ45 LAN IN port and one RJ45 PoE OUT port. Key specifications include a maximum output of 15.4 W, dimensions of 3.2 × 2.0 × 0.9 in., operating temperature from 0 °C to 40 °C, and FCC/CE safety certifications. Installation is plug‑and‑play with no configuration needed.
| LAN IN Port | 1 10/100M Auto‑Negotiation RJ45 |
|---|---|
| PoE OUT Port | 1 10/100M Auto‑Negotiation RJ45 |
| Maximum Power Output | 15.4 W (auto‑determined) |
| Input Power | External 48 VDC power adapter |
| Dimensions | 3.2 × 2.0 × 0.9 in. (81 × 52 × 24 mm) |
| Operating Temperature | 0 °C ~ 40 °C |
| Storage Temperature | -40 °C ~ 70 °C |
| Operating Humidity | 10 % ~ 90 % non‑condensing |
It fully complies with the IEEE 802.3af Power over Ethernet standard.
The adapter can provide up to 15.4 W of power, automatically adjusted to the device’s needs.
It supports UTP category 3‑5 cables for 10BASE‑T and UTP category 5 or STP cables for 100BASE‑TX, up to 100 m.