Intersil ICL3224E ICL3226E ICL3244E Datasheet

This document introduces the ICL32XXE series devices, which are 3.0V to 5.5V powered RS-232 transmitters/receivers that meet EIA/TIA-232 and V.28/V.24 specifications, even at VCC = 3.0V. Additionally, they provide ±15kV ESD protection (IEC61000-4-2 Air Gap and Human Body Model) on transmitter outputs and receiver inputs (RS-232 pins). Targeted applications are PDAs, Palmtops, and notebook and laptop computers where the low operational, and even lower standby, power consumption is critical. Efficient on-chip charge pumps, coupled with manual and enhanced automatic powerdown functions, reduce the standby supply current to a 1µA trickle. Small footprint packaging, and the use of small, low value capacitors ensure board space savings as well. Data rates greater than 250kbps are guaranteed at worst case load conditions. This family is fully compatible with 3.3V only systems, mixed 3.3V and 5.0V systems, and 5.0V only systems. The ICL3244E is a 3 driver, 5 receiver device that provides a complete serial port suitable for laptop or notebook computers. It also includes a noninverting always-active receiver for “wake-up” capability. These devices, feature an enhanced automatic powerdown function which powers down the on-chip power- supply and driver circuits. This occurs when all receiver and transmitter inputs detect no signal transitions for a period of 30 seconds.


Intersil ICL3224E ICL3226E ICL3244E Datasheet - cover page
Brand
Intersil
Category
Other Electronics
Document type
Datasheet
Language
English
Pages
20
File format
PDF
File size
357 KB
Published
27 March, 2012
Updated
30 September, 2023
MD5 checksum
F484F13E0EDC05E4D933449461FC226A

About this manual

The ICL32XXE family are low‑power RS‑232 transceiver ICs that operate from a single 3.0 V to 5.5 V supply, guarantee a minimum 250 kbps data rate, and include +15 kV ESD protection on all RS‑232 pins. They feature manual and enhanced automatic power‑down, require only four external 0.1 µF capacitors, and are offered in SSOP and SOIC packages.

The datasheet lists ordering information for each device variant, detailed pin‑out diagrams, absolute maximum ratings, and full electrical specifications such as supply current in power‑down (10 pA), output voltage swing, and timing characteristics. Package dimension tables for SSOP and SOIC formats are also provided.

What's inside

  • Features
  • Ordering Information
  • Pinouts
  • Pin Descriptions
  • Typical Operating Circuits
  • Absolute Maximum Ratings
  • Electrical Specifications
  • Package Dimensions

Specifications

Supply Voltage Range3.0 V to 5.5 V
Minimum Data Rate250 kbps
External Capacitors RequiredFour 0.1 µF capacitors
Maximum Data Rate (typical conditions)500 kbps

Frequently asked questions

What is the supply voltage range for the ICL32XXE devices?

They operate from 3.0 V to 5.5 V.

What is the guaranteed minimum data rate?

The devices guarantee a minimum data rate of 250 kbps.

How many external capacitors are required for operation?

Only four external 0.1 µF capacitors are needed.

Download PDF (357 KB)

More Intersil Manuals


View all Intersil manuals →