Error, fault and alarm codes of products - what each code means, its causes and what to do - read from the manufacturers’ manuals, with the manual page each answer comes from.
Signal input terminal status (in hexadecimal format). The manual lists no action for this code.
Shows the ON/OFF status of the digital I/O terminals. The manual's first action is: “Refer to "Displaying control I/O signal terminals" in Section 3.7 "Checking I/O Signal Status" for details.”
Shows the maximum temperature of the heat sink. The manual's first action is: “Unit: °C”
Shows the voltage of the intermediate dc circuit of the drive's main circuit. The manual's first action is: “Unit: V (volts)”
The motor run times (the number of times the drive running command is set to ON) are calculated and displayed. The manual's first action is: “1,000 indicates 1,000 times. When any number from 0.001 to 8.999 is display…
Shows the accumulated power-on time of the drive. The manual's first action is: “Unit: thousands of hours. When the total ontime is less than 10,000 hours (display: 0.001 to 0.899), it is possible to check data in hou…
This shows the running status as a hexadecimal display. The manual's first action is: “Refer to Displaying Running Status in Section 3.6 "Monitoring the Running Status."”
This shows the running direction being output. The manual's first action is: “F: normal; R: reverse; - - - : stop”
Current set frequencies. The manual lists no action for this code.
Current output voltage. The manual lists no action for this code.
Current output current. The manual lists no action for this code.
Output frequency before slip compensation. The manual lists no action for this code.
All 45 error codes of the GE Fuji AF-300 Mini™ GE Fuji AF-300 Mini Drive with their meaning, causes and what to do, taken from the manufacturer's manual with page references.
TPS: ABNORMAL WATER FLOW means the water flow sensor has been activated due to lack of water flow, requiring verification of water presence and replacement if sensor is faulty. The manual's first action is: “Check if …
TPS: FEEDING SYSTEM FAILURE indicates wire clogging or buckling in the feeding system, which may be resolved by inching retract or manual wire adjustment. The manual's first action is: “-The most problems automaticall…