Error, fault and alarm codes of products - what each code means, its causes and what to do - read from the manufacturers’ manuals, with the manual page each answer comes from.
Low Bat Report Code indicates a low-battery condition in the system's main battery. The manual's first action is: “UL: Required for UL commercial burglar alarm installations and required for residential fire alarm ins…
AC Loss Report Code is sent randomly with up to 4-hour delay if AC power fails, and no report occurs if AC restores before it goes out. The manual's first action is: “UL: Required for UL commercial burglar alarm insta…
Bypass Report Code is triggered when a zone is manually bypassed. The manual's first action is: “UL: Required for UL commercial burglar alarm installations.”
Trouble Report Code is sent when a zone has a trouble condition. The manual's first action is: “UL: Required for UL commercial burglar alarm installations and required for residential fire alarm installations.”
Exit Error Report Code indicates an alarm sound when entry/exit or interior zone remains open after the Exit Delay time expires while system is armed. The manual's first action is: “If the system is not disarmed befor…
All 60 error codes of the KOPPEL K5305-1V1 security system control panel with their meaning, causes and what to do, taken from the manufacturer's manual with page references.
Table problem occurred. The manual lists no action for this code.
SRQ is stuck in ON position. The manual lists no action for this code.
Serial poll status byte queue overflowed. The manual lists no action for this code.
GPIB bus error occurred. The manual lists no action for this code.
File system error occurred. The manual lists no action for this code.
No capability for the requested operation. The manual lists no action for this code.
Asynchronous I/O is in progress. The manual lists no action for this code.
Nonexistent GPIB board. The manual lists no action for this code.
I/O operation aborted due to timeout. The manual lists no action for this code.