Error Codes

Error, fault and alarm codes of products - what each code means, its causes and what to do - read from the manufacturers’ manuals, with the manual page each answer comes from.

• CodeOmron CS1W-ETN21, CJ1W-ETN21 Error 1001: Command too large

  The command sent to the system exceeds its maximum allowed size. The manual lists no action for this code.

• CodeOmron CS1W-ETN21, CJ1W-ETN21 Error 0302: CPU Unit error, execution not possible.

  CPU Unit error, execution not possible. The manual lists no action for this code.

• CodeOmron CS1W-ETN21, CJ1W-ETN21 Error 0105: Local IP address setting error

  The system detected an error in the local IP address setting. The manual's first action is: “Set the IP address correctly.”

• CodeOmron CS1W-ETN21, CJ1W-ETN21 Error 0000: Normal

  The system is operating normally. The manual lists no action for this code.

• Code listOmron CS1W-ETN21, CJ1W-ETN21 Error Codes

  All 66 error codes of the Omron CS1W-ETN21, CJ1W-ETN21 Omron CS1W-ETN21, CJ1W-ETN21 with their meaning, causes and what to do, taken from the manufacturer's manual with page references.

• CodeHeatmiser neoStat Series Error E2: The remote AIR probe has not been connected. The remote AIR probe has not…

  The remote AIR probe has not been connected or wired incorrectly, or is faulty. The manual lists no action for this code.

• CodeHeatmiser neoStat Series Error E1: The remote FLOOR probe has not been connected. The remote FLOOR probe has…

  The remote FLOOR probe has not been connected or wired incorrectly, or is faulty. The manual lists no action for this code.

• CodeHeatmiser neoStat Series Error E0: The internal sensor has developed a fault.

  The internal sensor has developed a fault. The manual lists no action for this code.

• Code listHeatmiser neoStat Series Error Codes

  All 3 error codes of the Heatmiser neoStat Series Heatmiser neoStat Series with their meaning, causes and what to do, taken from the manufacturer's manual with page references.

• CodeKT KT-LCD3 Error 06_info: Motor or controller has short circuit Abnormality

  Motor or controller has short circuit Abnormality The manual lists no action for this code.

• CodeKT KT-LCD3 Error 05_info: Axis speed sensor Abnormality(only applied to torque sensor )

  Axis speed sensor Abnormality(only applied to torque sensor ) The manual lists no action for this code.

• CodeKT KT-LCD3 Error 04_info: Torque sensor Signal Abnormality

  Torque sensor Signal Abnormality indicates a problem with the torque sensor. The manual lists no action for this code.

• CodeKT KT-LCD3 Error 03_info: Motor Hall Signal Abnormality

  Motor Hall Signal Abnormality indicates a problem with motor signal detection. The manual lists no action for this code.

• CodeKT KT-LCD3 Error 01_info: Throttle Abnormality

  Throttle Abnormality indicates an issue with the throttle system. The manual lists no action for this code.

• Code listKT KT-LCD3 Error Codes

  All 5 error codes of the KT KT-LCD3 KT KT-LCD3 with their meaning, causes and what to do, taken from the manufacturer's manual with page references.