Industrial

The LM4890 is an audio power amplifier primarily designed for demanding applications in mobile phones and other portable communication device applications. It is capable of delivering 1 watt of continuous average power to an 8Ω BTL load with less than 1% distortion (THD+N) from a 5VDC power supply.

Vinculum VNC1L is the first of FTDI's Vinculum family of Embedded USB host controller integrated circuit devices

The SP6656 is a 400mA synchronous buck regulator that is ideal for portable applications that use a Li-Ion or 3 cell alkaline/NiCD/NiMH input. The SP6656’s proprietary control loop, 20µA light load quiescent current, and 0.3Ω power switches provide excellent efficiency across a wide range of output currents. As the input battery supply decreases towards the output voltage the SP6656 seamlessly transitions into 100% duty ratio operation further extending useful battery life. The SP6656 is protected against overload and short circuit conditions with a precise inductor peak current limit. Other features include externally programmable output voltage down to 1.0V, dynamically adjustable output voltage, logic level shutdown control, and 140°C over temperature shutdown.

AT24C512 is a serial electrically erasable and programmable read only memory (EEPROM) with features of low power and low voltage operation. It has an internally organized structure of 65,536 x 8 bits, with a two-wire serial interface, Schmitt triggers, and filtered inputs for noise suppression. The product supports bidirectional data transfer protocol, compatibility with multiple operating voltages (2.7V to 5.5V, 1.8V to 3.6V) and different frequencies (1 MHz, 400 kHz, 100 kHz). It also features a write protect pin, 128-byte page write mode, self-timed write cycle, high reliability (100,000 write cycles, 40 years data retention), etc. It can be used in industrial and commercial applications.

The PS710A-1A and PS710AL-1A are solid state relays with GaAs LEDs on the input side and MOS FETs on the output side. It is suitable for PLC applications due to its large continuous load current and low on-state resistance.

KSZ8041NL 10Base-T/100Base-TX Physical Layer Transceiver Data Sheet

This document describes the features and characteristics of the CS4272 24-bit, 192 kHz stereo audio CODEC from Cirrus Logic, Inc., including high performance, high dynamic range, selectable digital filters, and selectable serial audio interface formats.

This document introduces the ACS755xCB-050 current sensor, including its supply voltage, output voltage, operating temperature range, and other characteristics. The product features high reliability, single +5V supply, 3kVRMS isolation voltage, 18kHz bandwidth, and is suitable for automotive systems, industrial systems, power conversion, battery monitoring, and other applications.

This document is a hardware manual for the RENESAS 16-bit single-chip microcomputer M16C family / R8C /Tiny series R8C/10 group 16. The document describes the features and characteristics of the product.

The LP2981 is a 100 mA, fixed-output voltage regulator designed specifically to meet the requirements of battery-powered applications. It uses an optimized VIP™ (Vertically Integrated PNP) process to deliver unmatched performance in all specifications critical to battery-powered designs: Dropout Voltage. Typically 200 mV @ 100 mA load, and 7 mV @ 1 mA load. Ground Pin Current. Typically 600 µA @ 100 mA load, and 80 µA @ 1 mA load. Sleep Mode. Less than 1 µA quiescent current when ON/OFF pin is pulled low. Smallest Possible Size. SOT-23 and micro SMD packages use an absolute minimum board space. Precision Output. 0.75% tolerance output voltages available (A grade). Eleven voltage options, from 2.5V to 5.0V, are available as standard products.

AD9644 is a 14-bit, 80 MSPS/155 MSPS, 1.8 V dual serial output analog-to-digital converter (ADC) that features low power, a flexible analog input range, and a programmable internal ADC voltage reference.

This is a summary of the AD9641 data sheet. The AD9641 is a 14-bit, 80 MSPS/155 MSPS, 1.8 V serial output analog-to-digital converter (ADC).

AD7298-1 is a 10-bit high precision low power 8-channel successive approximation ADC, working voltage is 2.8V to 3.6V, conversion rate is 1MSPS, support single-ended input, internal integration 2.5V reference voltage, support SPI interface.

The AD7608 is an 8-channel data acquisition system with 18-bit, bipolar, simultaneous sampling ADC, which can be applied to power line monitoring and protection systems, multiphase motor control systems and other fields

The AD6649 is a diversity receiver with high SNR, high SFDR, and low noise density. It features a dual-channel ADC and wideband digital processor, supporting high sample rates and IF sampling frequencies.