Industrial

This is an A4 file with a variety of colors including blue, green, silver, burgundy, purple, and assorted. It is supplied in packs of 10.

This document lists a range of 3mm standard through-panel LED products, including red, green, yellow, orange, blue and white. Each product has its own forward current, typical voltage, maximum angle and millicandela.

This document is an introduction manual of PB-LM3S9B90EK-00. The manual mainly introduces the features and characteristics of PB-LM3S9B90EK-00, including 10/100 Mbit Ethernet port, full-speed USB-OTG port, In-Circuit Debug Interface (ICDI) board, GPIO ports etc.

gnICE is a fast and low-cost USB JTAG In-Circuit-Emulator for Blackfin processors. It is designed to provide reliable JTAG debugging and CFI NOR Flash programming via USB.

This datasheet introduces the DAC9881 device from TI. It is a 18-bit single-channel low-noise voltage-output digital-to-analog converter. The device features 18-bit monotonicity, excellent linearity, very low noise and fast settling time. The device's on-chip precision output amplifier allows rail-to-rail output swing to be achieved over the full supply range of 2.7V to 5.5V. The device supports a standard SPI serial interface capable of operating with input data clock frequencies up to 50MHz. The DAC9881 requires an external reference voltage to set the output range of the DAC channel. A programmable power-on reset circuit is also incorporated into the device to ensure that the DAC output powers up at zero-scale or midscale, and in the power-down mode the output can be turned off.

MT9P031 is a 1/2.5-inch 5-Mp digital image sensor that incorporates sophisticated camera functions such as windowing, binning, column and row skip mode, and snapshot mode. It is program-mable through a simple two-wire serial interface. The MT9P031 produces extraordinarily clear, sharp digital pictures, and its ability to capture both continuous video and single frames makes it the perfect choice for a wide range of consumer and commercial security applications, including high resolution network cameras; pan, tilt, and zoom cameras; and hybrid video/still cameras.

Altium NanoBoard NB2 is an innovative and reconfigurable hardware platform that harnesses the power of today's high-capacity, low-cost programmable devices, allowing rapid system development and implementation. It works seamlessly and in full synchronization with Altium's next-generation electronic design solution, Altium Designer. It features real-time on-board power monitoring and analysis for the entire system, and supports a range of swappable target-FPGA and processor daughter boards from all major chip vendors. Powerful instrumentation reduces or eliminates the need to simulate, while reprogrammability eliminates the need to build multiple prototypes during development.

NanoBoard 3000 Series is a re-programmable hardware development platform from Altium that harnesses the power of a dedicated high-capacity, low-cost programmable device to allow rapid and interactive implementation and debugging of your designs. NanoBoard 3000 Series is the perfect entry-point to discover and explore the world of FPGA-based embedded systems design. NanoBoard 3000 Series programmable hardware realm allows you to update the design quickly and many times over without incurring cost or time penalties. NanoBoard 3000 Series works seamlessly and in full synchronization with Altium's next-generation electronic design solution, Altium Designer. NanoBoard 3000 Series motherboard features a high-capacity FPGA and provision for a single plug-in peripheral board (Altium or user's own) for additional system flexibility. NanoBoard 3000 Series has automatic peripheral board detection and configuration. NanoBoard 3000 Series features a dual boot system, allowing the board to update its firmware in the field by itself, over a standard USB connection – no parallel port or USB JTAG Adapter required. NanoBoard 3000 Series motherboard specifications Choice of high-capacity FPGAs - NanoBoard 3000XN – with fixed Xilinx® Spartan™-3AN device (XC3S1400AN-4FGG676C) - NanoBoard 3000AL – with fixed Altera® Cyclone™ III device (EP3C40F780C8N) - NanoBoard 3000LC – with fixed LatticeECP2™ device (LFE2- 35SE-5FN672C) Integrated color TFT LCD panel (240x320) with touch screen

The TELUX™ series is a clear, non diffused LED for high end applications where supreme luminous flux is required. It is designed in an industry standard 7.62 mm square package utilizing highly developed (AS) AllnGaP and InGaN technologies. The supreme heat dissipation of TELUX™ allows applications at high ambient temperatures. All packing units are binned for luminous flux and color to achieve best homogenous light appearance in application.

This is Schurter's OGN series of fuse holders, with a size of 5x20mm, rated voltage 250VAC, rated current 10A and transparent cover.

SKINTOP® Click, the most innovative cable entry system on the market for fastest mounting, with all the reliable attributes of the world renowned Skintop Cable Gland range. Click in – turn left – turn right – done. Skintop Click-R with reducing seal for smaller clamping ranges.

This is a handbook for Altera configuration devices.

GSOT03 to GSOT36 is a single-line ESD protection device from Vishay Semiconductors. It has ESD immunity, meets IEC 61000-4-2 standard, with a maximum voltage of 30 kV, and is packaged in SOT23. It is lead-free and meets RoHS and WEEE standards.