Industrial

This document describes H-bridge drivers for brush motor applications. Each IC can operate at a range of power supply voltages (from 3.0V to 5.5V), supporting output currents of up to 2A. MOS transistors in the output stage allow for PWM signal control, while the integrated VREF voltage control function of previous models offers direct replacement of deprecated motor driver ICs. These highly efficient H-bridge driver ICs facilitate low-power consumption design.

The HT27LC512 chip family is a low-power, 512K bit, +3.3V electrically one-time pro- grammable (OTP) read-only memories (EPROM).

The HSMS-2700 series is a high-performance Schottky diode designed for transient suppression. It features ultra-low series resistance, picosecond switching, and low capacitance. It is suitable for RF and computer designs that require circuit protection, high-speed switching, and voltage clamping.

This datasheet introduces ROHM's 1ch spindle motor driver IC BA6859AFP-Y,BA6664FM,BD6671FM, including 3-phase full-wave pseudo-linear system, 180° electrifying direct PWM drive system, power saving, TSD (thermal shutdown), current limiting, Hall bias circuit, FG output, 3-phase component FG output, circuit direction detection function, reverse rotation prevention circuit, short brake pin, brake mode selection pin, DSP 3.3 V etc.

This document describes a half-wave motor driver for fan motor. It features a built-in reverse current protection diode and several absolute maximum ratings such as supply voltage, power dissipation, operating temperature, etc. The product also has characteristics like output current, AL signal output current and voltage, FG signal output current and voltage, etc.

BA6950FS, BA6951FS are reversible motor drivers that can directly drive forward and reverse rotations brushes motors. Motor rotating speed can be optionally set through the control terminal, and the motor can be driven at a constant speed by the built-in current feedback amplifier.

This product is a single motor reversible motor driver that can output 1.0A. The output mode can be set to four modes: normal, reverse, stop (idling), and braking according to the logic input (2 inputs).

This document describes the special features, electrical specifications, input, output and leakage current standards of HPS10/12/15 series of 1000-6000 watts

The document is about HP1 series metal case, including TO-3 or Stud Mount devices, and provides mounting methods, including natural convection and fan convection.

This document describes the features and characteristics of MU SC FC harsh environment attenuators and terminators, including user-friendly push-pull mechanism, guaranteed attenuation over a wide bandwidth, selectable attenuation levels, and maximum input power.

This document describes the features and characteristics of HiTRON 2007/07/27 UNIVERSAL INPUT AC-DC MEDICAL APPLICATION OPEN FRAME SINGLE & MULTI-OUTPUT 100 WATTS INTERNAL SWITCHING POWER SUPPLIES HMI100 series products.

HMC510LP5 is a GaAs InGaP Heterojunction Bipolar Transistor (HBT) MMIC VCO from Hittite Microwave Corporation. The frequency range is 8.45-9.55 GHz. The VCO integrates resonators, negative resistance devices, varactor diodes, and features half frequency and divide-by-4 outputs. The VCO's phase noise performance is excellent over temperature, shock, and process due to the oscillator's monolithic structure. Power output is +13 dBm typical from a +5V supply voltage. The prescaler and RF/2 functions can be disabled to conserve current if not required. The voltage controlled oscillator is packaged in a leadless QFN 5x5 mm surface mount package, and requires no external matching components.

This is a magnetic component selector guide, which lists the specifications of HM72A series products in detail

The BA00DD0/CC0 series is a low-saturation regulator with a maximum output current of 2A/1A. The output voltage can be arbitrarily configured using the external resistance. These series of LDO regulators are offered in a broad packaging lineup. This IC has a built-in over-current protection circuit that prevents the destruction of the IC due to output short circuits and a thermal shutdown circuit that protects the IC from thermal damage due to overloading.

The BA3258HFP, BA33D15HFP, BA33D18HFP are fixed 2-output low-saturation regulators with a voltage accuracy at both outputs of ±2%. These series incorporate both overcurrent protection and thermal shutdown (TSD) circuits in order to prevent damage due to output short-circuiting and overloading, respectively. The features include output current capacity of 1A (BA3258HFP) and 0.5A (BA33D□□ Series), the ability to use a ceramic capacitor to prevent output oscillation (BA3258HFP), high ripple rejection (BA33D□□ Series). The applications include FPDs, TVs, PCs, DSPs in DVDs and CDs.