Industrial

BL8553 is belling's 400mA CMOS low dropout low power regulator, with low dropout, high precision, high reliability, etc. It is suitable for various portable electronic products, household appliances, communication equipment, automotive electronics and other fields.

UAA4713 is a monolithic integrated circuit intended to control triac or relay switch for AC-mains timer applications. The device can be used in a wide range of industrial and consumer applications such as light control, automatic door opening detector, fire alarm, fluid level control, etc. The circuit processes the output signal of an infrared pyroelectric detector which senses temperature changes caused by heat radiation of the human body. If the sensor detects a temperature change, a programmable timer will start and switch a lamp or other loads to the mains. A further input for a photo-resistive sensor allows to program circuit operation depending on the daylight intensity. Internal circuits avoid false triggering of the external actuators.

Model BH Series High Profile SIP Thick Film Conformal Coated Resistor Networks Specifications

The µA7800 series of positive-voltage regulators is a three-terminal regulator with high power dissipation capability, output current up to 1.5 A, internal thermal overload protection, internal short circuit current limiting and output transistor safe-area compensation.

The document describes the features and characteristics of Vishay Telefunken TZS4678.TZS4717 Silicon Epitaxial Planar Z–Diodes, including Zener voltage, maximum voltage change, stability, and low noise. The product is mainly used for voltage stabilization.

This datasheet provides the dimensions, impedance, test frequency, maximum DC resistance and maximum current information of BF-NB series multilayer inductors.

The datasheet provides information about BDW73, BDW73A, BDW73B, BDW73C, BDW73D NPN silicon power Darlington transistors, including package, ratings, polarity, pins, power dissipation, working temperature, nominal current, etc.

This document describes a dual operational amplifier with low power consumption, the ability to swing the output voltage to ground, excellent phase margin on capacitive loads, stable and low offset voltage. The product offers three different power consumption options for optimal consumption-speed ratio.

This document describes the features and characteristics of the TS10P series single-phase 10.0 amp glass passivated bridge rectifiers, including UL recognition, glass passivated junction, ideal for printed circuit board, reliable low-cost construction, plastic material with UL 94V-0 flammability classification, surge overload rating up to 170 amperes peak, high case dielectric strength of 2000VRMS, and isolated voltage from case to lead over 2500 volts.

TRF1223 is a power amplifier chip from Texas Instruments. It works in the frequency range of 3.3-3.8GHz and has an output power of 1W. It has 16dB of gain steps and 1-bit TTL control signals, which can achieve a total gain control of 32dB.

This document introduces the features and characteristics of the B84263 power filter produced by EPCOS AG. The filter uses a multi-stage design and can achieve 100 dB of attenuation in the frequency range from 14 kHz to 40 GHz. The filter has a small volume and low voltage drop, and it produces almost no leakage current in normal operation.

TPS2830, TPS2831 are fast synchronous-buck MOSFET drivers with deadtime control. These devices are ideal for designing high-performance power supplies using a switching controller that does not include suitable MOSFET drivers on the chip. The drivers are designed to deliver 2.4A peak currents into large capacitive loads. Higher currents can be controlled by using multiple drivers in a multiphase configuration. The high-side driver can be configured as a ground-reference driver or as a floating bootstrap driver. An adaptive dead-time control circuit eliminates shoot-through currents through the main power FETs during switching transitions, and provides high efficiency for the buck regulator. The TPS2830/31 drivers have additional control functions: ENABLE, SYNC, and CROWBAR.