Industrial

Mini BNC is a 75 Ohm miniature BNC series RF connector from Tyco Electronics that retains the characteristics that made the standard BNC so popular, but offers 40% more interconnects in the same area. The Mini BNC is an excellent fit for 75 Ohm systems, offering 500 mating cycles, electrical performance through 2 GHz, and is completely intermateable with competitive miniature BNC offerings.

LR Z18 x, LY Z181, LG Z18 x are array LED, diffused with red, yellow and green light color. The luminous intensity is greater than 0.25 mcd. The product has a scattered characteristic and can be used as a multiple array.

This document is a parameter table of LN533RAMR series three digit digital tube

This document is a datasheet of LED products, including product model, package type, color, luminous intensity, working voltage, working temperature and other information.

LM3310 is a step-up DC/DC converter integrated with an Operational Amplifier and a gate pulse modulation switch from National Semiconductor. It features a low RDSON internal switch for maximum efficiency, adjustable output voltage, operating frequency between 660kHz and 1.28MHz, and soft-start function. It is suitable for TFT bias supplies and portable applications.

This file introduces the characteristics of the LM285/LM385 series micropower two-terminal bandgap voltage regulator diodes. This series products are packaged in a low-cost TO-226 plastic case and are available with an operating current range of 10μA to 20mA, featuring exceptionally low dynamic impedance, low noise and stable operation over time and temperature. Tight voltage tolerances are achieved by on-chip trimming. The large dynamic operating range enables these devices to be used in applications with widely varying supplies with excellent regulation. Extremely low operating current make these devices ideal for micropower circuitry like portable instrumentation, regulators and other analog circuitry where extended battery life is required.

The LM2766 is a CMOS charge-pump voltage converter that doubles the input voltage in the range of +1.8V to +5.5V. This circuit uses two low-cost capacitors and a diode to provide up to 20mA of output current. The LM2766 operates at a switching frequency of 200kHz to reduce output resistance and voltage ripple. With an operating current of only 350µA (operating efficiency greater than 90% with most loads) and 0.1µA typical shutdown current, the LM2766 provides ideal performance for battery-powered systems. The device is manufactured in a SOT-23-6 package.

The document introduces the features and characteristics of the LM-2512 series LED displays, including 16×32 dot matrix, dual-color red/green, and external dimensions of 39.9×79.9×6.2mm.

LM1296 is a raster geometry correction system for multi-frequency displays

The LM1086 is a series of low dropout positive voltage regulators with a maximum dropout of 1.5V at 1.5A of load current. It has the same pin-out as National Semiconductor’s industry standard LM317. The LM1086 is available in an adjustable version, which can set the output voltage with only two external resistors. It is also available in six fixed voltages: 1.8V, 2.5V, 2.85V, 3.3V, 3.45V and 5.0V. The fixed versions integrate the adjust resistors. The LM1086 circuit includes a zener trimmed bandgap ref- erence, current limiting and thermal shutdown.

The LH4002A / LH4002 / LH4002C is a high speed voltage follower designed by CALOGIC Corporation to drive video signals from DC up to 300MHz. At voltage supplies of ±5V, the LH4002 family will provide up to 80mA into 50Ω at slew rates of 2000 V/µs. This series is intended to fulfill a wide range of high speed applications including video distribution, impedance transformation, and load isolation. It is also suitable for use in current booster applications within an op amp loop. This allows the output current capability of existing op amps to be increased.

This is a document about LH28F800BG-L/BGH-L product. It is a high-density, low-cost, non-volatile, read/write storage solution for a wide range of applications. It can operate at VCC = 2.7 V and VPP = 2.7 V. It has low voltage operation capability, longer battery life and suits for cellular phone application. Its boot, parameter and main-blocked architecture, flexible voltage and enhanced cycling capability provide for highly flexible component suitable for portable terminals and personal computers. Its enhanced suspend capabilities provide for an ideal solution for code + data storage applications. For secure code storage applications, such as networking, where code is either directly executed out of flash or downloaded to DRAM, the LH28F800BG-L/BGH-L offer two levels of protection : absolute protection with VPP at GND, selective hardware boot block locking. These alternatives give designers ultimate control of their code security needs.

LB1662D, 1662M are two-phase brushless motor drivers operated from a 5 V power supply. Motor Lock protection and automatic return can be provided with a minimum number of external parts.

112516 is a straight crimp BNC coaxial connector with captive contact and miniature cable produced by Amphenol Connex. The connector has a brass shell, 178/196 cable wire, 14 cable group, nickel surface treatment, Delrin insulation, 50 ohm impedance and B crimp tool.