Industrial

DM74ALS520/DM74ALS521 are two 8-bit comparators, can compare two 8-bit data with “equal to” function. Both comparators can be enabled externally, and have single-ended outputs. DM74ALS520 also provides pull-up resistors for B input for analog or switch data.

This is a 200mw surface mount zener diode with planar die construction, ultra-small surface mount package, general purpose and other features

ECONOLINE - DC/DC-Converter RTS/RTD Series, 2 Watt, SMD (Single & Dual Output) is a DC/DC converter produced by RECOM company, with features including 1kVDC isolation, efficiency up to 70%, UL 94V-0 package material, internal SMD structure.

The RT9002A/B/C is a dual-channel, low noise, and low dropout regulator from Richtek. It features low quiescent current, wide operating voltage range, ultra-fast transient response, tight load and line regulation, current limiting/thermal protection and high ripple rejection ratio.

This data sheet provides the specifications of ECONOLINE - DC/DC-Converter RXT & RYT Series 1W.

11DQ09/11DQ10 Schottky rectifier is a low power, high frequency diode with very low forward voltage drop and moderate leakage. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection.

The TLV431A/D series of low voltage precision adjustable shunt regulators are programmable over a wide voltage range of 1.24V to 16V. The TLV431A series features a guaranteed reference accuracy of ±1.0% at 25°C and ±2.0% over the entire industrial temperature range of −40°C to 85°C. For TLV431B series, the accuracy is even higher, it’s ±0.5% and ±1.0% respectively. These devices exhibit a sharp low current turn−on characteristic with a low dynamic impedance of 0.20 Ω over an operating current range of 100μA to 20mA. This combination of features makes this series an excellent replacement for zener diodes in numerous applications circuits that require a precise reference voltage. When combined with an optocoupler, the TLV431A/B can be used as an error amplifier for controlling the feedback loop in isolated low output voltage (3.0 V to 3.3 V) switching power supplies. These devices are available in economical TO−92−3 and micro size TSOP−5 and SOT−23−3 packages.

TLV27L1 and TLV27L2 are a family of micropower rail-to-rail output operational amplifiers. They feature bipolar rail-to-rail output, high input bias current, high wide bandwidth, high slew rate, low supply current, and input noise voltage. They are suitable for portable medical devices, power monitoring, low power security detection systems, smoke detectors, and more.

The Am29LV800B is an 8 megabit (1 M x 8-bit/512 K x 16-bit) CMOS 3.0-volt-only, boot sector flash memory die with single power supply operation, high performance, low power consumption, flexible sector architecture, sector protection features, unlock bypass program command, top or bottom boot block configurations.

The LTC1595/LTC1596/LTC1596-1 are serial input, 16-bit multiplying current output DACs. They feature low DNL and INL, low glitch impulse, fast settling to 1LSB, and compatibility with industry standard 12-bit DACs.

AK4380 is a high performance audio product that supports sampling rates from 8kHz to 96kHz and features 128x oversampling and 24-bit 8x FIR digital filters.

AIC809/AIC810 3-Pin Microprocessor Reset Circuits are low-power microprocessor (µP) supervisory circuits used to monitor power supplies in µP and digital systems.

The AIC1734 is a 3-pin low dropout linear regulator from Analog Integrations Corporation. It features zero base current loss, very low dropout voltage, and 2% accuracy output voltage. Typical ground current remains approximately 55µA, for loading ranging from zero to maximum. Dropout voltage at 300mA output current is exceptionally low. Built-in output current limiting and thermal limiting provide maximal protection to the AIC1734 against fault conditions. The AIC1734 is available in popular SOT-23, SOT-89 and TO-92 packages.