Industrial

The HT70XX series is a set of three-terminal low power voltage detectors implemented in CMOS technology. Each voltage detector in the series detects a particular fixed voltage ranging from 2.2V to 7V. The voltage de- tectors consist of a high-precision and low power con- sumption standard voltage source, a comparator, hysteresis circuit, and an output driver. CMOS technol- ogy ensures low power consumption. Although designed primarily as fixed voltage detectors, these devices can be used with external components to detect user specified threshold voltages (NMOS open drain type only).

HT48R06A-1 is an 8-bit OTP microcontroller designed for multiple I/O product applications. It features low power consumption and electric programming capability, making it suitable for product development.

The TLE202x, TLE202xA, and TLE202xB are precision, high-speed, low-power operational amplifiers using a new Texas Instruments Excalibur process. These devices combine the best features of the OP21 with highly improved slew rate and unity-gain bandwidth. The complementary bipolar Excalibur process utilizes isolated vertical pnp transistors that yield dramatic improvement in unity-gain bandwidth and slew rate over similar devices. The addition of a bias circuit in conjunction with this process results in extremely stable parameters with both time and temperature. This means that a precision device remains a precision device even with changes in temperature and over years of use. This combination of excellent dc performance with a common-mode input voltage range that inclu

The CENTRAL SEMICONDUCTOR 1.5SMC6.8A Series is a surface mount unidirectional glass passivated junction transient voltage suppressor designed to protect voltage sensitive components from high voltage transients.

The document describes the features and characteristics of SURSENSE ultra low pressure sensors, including position sensitivity, temperature compensation, long-term stability, etc. The sensors are suitable for applications in medical instrumentation, HVAC, industrial instrumentation, and environmental controls.

The AIC1723 is a low dropout linear regulator from Analog Integrations Corporation. Its features include zero base current loss, very low dropout voltage and 2% accuracy output voltage. Typical ground current stays at 65µA, from no load to maximum loading conditions. Dropout voltage at 500mA output current is exceptionally low: 750mV for the AIC1723-50 and AIC1723-52, 900mV for the AIC1723-38, AIC1723-37, AIC1723-35 and AIC1723-33. Output current limiting and thermal limiting are built in to provide maximal protection to the AIC1723 against fault conditions. The AIC1723 comes in the popular SOT-223, TO-252, TO-92 etc. packages.

The AIC1594 is a 1A step-down PWM regulator from Analog Integrations Corporation. It can operate at input voltages from 4.5V to 36V and has 2.5V, 3.3V, 5V, 12V, and adjustable output versions. The adjustable version has an output voltage range of 1.25V to 30V with ±4% maximum line and load regulation. The regulator is available in TO220-5 and TO263-5 packages and requires only 4 external components. It has a fixed constant frequency of 150KHz/300KHz, a low power standby mode (IQ typically 80µA), TTL shutdown capability, output overvoltage protection, current limit and thermal shutdown protection, and a guaranteed output current of 1A.

The AIC1569A is a 5-bit DAC, synchronous PWM power regulator. It is compatible with HIP6004 and features simple voltage-mode PWM control, dual N-channel MOSFET synchronous drive, and fast transient response.

Anachip AF9412N N-Channel 30-V (D-S) MOSFET is a low-power N-channel MOSFET with a rated voltage of 30V. Typical applications include PWM DC-DC converters, power management in portable and battery-powered products such as computers, printers, battery chargers, telecommunication power systems, and telephone power systems.

The TigerSHARC® Embedded Processor ADSP-TS203S Rev. PrB is a high-performance static superscalar DSP processor with a 500 MHz, 2.0 ns instruction cycle rate, 4M bits of internal DRAM memory and a 25×25 mm (576-ball) thermally enhanced ball grid array package.

The document describes the features and characteristics of the ADSP-2188M DSP microcomputer, including performance, instruction execution time, multifunction instructions, and low power dissipation.

The ADS5500 is a 14-bit, 125MSPS high-performance analog-to-digital converter (ADC) that includes a high-bandwidth linear sample-and-hold stage (S&H) and internal reference. The ADS5500 has excellent power consumption of 780mW at 3.3V single-supply voltage.

ADC08831/ADC08832 8-Bit Serial I/O CMOS A/D Converters with Multiplexer and Sample/Hold Function

The REG710 is a switched capacitor voltage converter from Schneider Electric that produces a regulated, low-ripple output voltage from an unregulated input voltage. A wide-input supply voltage of 1.8V to 5.5V makes the REG710 ideal for a variety of battery sources, such as single cell Li-Ion, or two and three cell nickel- or alkaline-based chemistries. The input voltage may vary above and below the output voltage and the output will remain in regulation. It works equally well for step-up or step-down applications without the need for an inductor, providing low EMI DC/DC conversion. The high switching frequency allows the use of small capacitors, which reduces cost.

The REG1117 is a family of three-terminal voltage regulators that includes a variety of fixed- and adjustable-voltage versions, two currents (800mA and 1A) and two package types (SOT-223 and DDPAK).