Industrial

The MC68328 is a processor designed by Motorola which is integrated with a LCD controller and is suitable for many portable applications.

This document is the datasheet of IDT54/74FCT139T/AT/CT. It is a dual 1-of-4 decoder built using an advanced dual metal CMOS technology. It has two independent decoders, each of which accepts two binary weighted inputs (A0-A1) and provides four mutually exclusive active LOW outputs (O0-O3). Each de- coder has an active LOW enable (E). When E is HIGH, all outputs are forced HIGH.

This document is the MC68306 Integrated EC000 Processor User's Manual, which mainly introduces the product's features and usage methods

24C01A/02A/04A is a 1K/2K/4K bit Electrically Erasable PROM produced by Microchip Technology Inc. The device is organized with a standard two wire serial interface and features low power CMOS technology, hardware write protection, and self-timed write cycle (including auto-erase). The device offers a single byte write cycle time of 1ms, data retention time of over 200 years, and is guaranteed for 1,000,000 erase/write cycles. 24C01A/02A/04A is available in 8-pin DIP/SOIC packages and extended temperature range devices.

The AT87F51 is a low-power, high-performance CMOS 8-bit microcomputer with 4K bytes of QuickFlash Programmable Read Only Memory. The device is manufactured using Atmel’s high density nonvolatile memory technology and is compatible with the industry standard MCS-51™ instruction set and pinout. The on-chip QuickFlash allows the program memory to be user programmed by a conventional nonvolatile programmer.

The 74F194 4-bit bidirectional universal shift register is a Philips Semiconductors integrated circuit. The product has the ability to shift right and left, can synchronously transfer parallel and serial data, is easily expandable for both serial and parallel operation, has an asynchronous master reset function, and has a hold (do nothing) mode.

74F125 and 74F126 are two quad buffers that support 3-state operation mode. They have high impedance NPN base inputs for reduced loading, typical propagation delay of 5.0ns, and typical supply current of 23mA (74F125) and 26mA (74F126). They can be used in the commercial range, with VCC of 5V ±10%, and Tamb of 0°C to +70°C. Their packaging is 14-pin plastic DIP (N74F125N and N74F126N), 14-pin plastic SO (N74F125D and N74F126D), and SOT108-1.

The document describes the features and characteristics of the IDT723626, IDT723636, and IDT723646 products, including memory storage capacity, clock frequencies, FIFO data buffering, etc.

AT49BV040 is a 4M-bit single-voltage 2.7-volt Battery-Voltage™ flash memory with the following features: Single voltage for read and write: 2.7V to 3.6V (BV), 3.0V to 3.6V (LV), Fast read access time - 120 ns, Internal program control and timer, 16K bytes boot block with lockout, Fast chip erase cycle time - 10 seconds, Byte-by-Byte programming - Typical 30µs/Byte, Hardware data protection, DATA polling for end of program detection, Low power dissipation - 25 mA active current - 50µA CMOS standby current, Typical 10,000 write cycles, Small packaging - 8 x 8 mm CBGA - 8 x 14 mm V-TSOP.

The AT22V10B is an ultra-high performance CMOS Programmable Logic Device (PLD). Speeds down to 7.5 ns and operation up to 166 MHz are offered. All pins offer a low ± 10 µA leakage. The AT22V10B logic functionality is fully compatible with the standard 22V10. The 12 dedi- cated inputs and ten configurable I/O pins allow implementation of logic requiring up to 22 input signals. The AT22V10B also provides individual output enable product terms for each of the ten I/Os. (continued)

AT1369 is a 2-channel synchronous buck PWM controller with features such as high efficiency, external MOSFET, maximum duty cycle of 100%, soft start, and output voltage accuracy of ±2%.

This PDF document provides information about the products of Freescale Semiconductor. More information about the BR729D supplier can be found at www.freescale.com nc.