Industrial

This document describes the specifications and features of a switch product with model LP2203, including electrical ratings, materials used, and ordering information.

This document is about the safety instructions of the 350 watt and 500 watt bass amplifiers HA3500 and HA5500. The document mentions the safety precautions to be taken when using these devices, such as avoiding exposure to rain and moisture, not removing the cover and back panel of the device, not using the device near water or moisture, and only using a damp cloth to clean the device.

The LMH6723/LMH6724/LMH6725 is a single/dual/quad 370 MHz 1 mA current feedback op amp. It provides a 260 MHz small signal bandwidth at a gain of +2 V/V and a 600 V/µs slew rate while consuming only 1 mA from ±5V supplies. The LMH6723/LMH6724/LMH6725 supports video applications with its 0.03% and 0.11˚ differential gain and phase errors for NTSC and PAL video signals while driving a back terminated 75Ω load. The LMH6723/LMH6724/LMH6725 also offers a flat gain response of 0.1 dB to 100 MHz. Additionally, the LMH6723/LMH6724/LMH6725 can deliver 110 mA of linear output current. This level of performance, as well as a wide supply range of 4.5 to 12V, makes the LMH6723/LMH6724/LMH6725 an ideal op amp for a variety of portable applications. The LMH6723/LMH6724/LMH6725's small packages (SOIC & SOT23), low power requirement and high performance, allow it to serve a wide variety of portable applications.

The LMH6723/LMH6724/LMH6725 is a single/dual/quad 370 MHz 1 mA current feedback operational amplifier, providing a small signal bandwidth of 260 MHz, a slew rate of 600 V/µs, and consuming only 1 mA from ±5V supplies. It supports video applications with a differential gain and phase of 0.03% and 0.11˚ for NTSC and PAL video signals. The LMH6723/LMH6724/LMH6725 also offers a flat gain response of 0.1 dB to 100 MHz and can deliver 110 mA of linear output current. It is suitable for a variety of portable applications.

LMH6718 is a dual, low cost high speed (130MHz) buffer which features user programmable gains of +2, +1, and -1V/V

The LMH6715 is a dual wideband video op amp that combines high speed, low power consumption, low noise, and low distortion. It provides a small signal bandwidth of 400MHz at a gain of +2V/V and a slew rate of 1300V/µs. The LMH6715 offers exceptional video performance with 0.02% and 0.02˚ differential gain and phase errors for driving up to four back terminated 75Ω loads. Additionally, each amplifier can deliver 70mA of output current. It is suitable for high density, broadcast quality video systems, as well as applications such as differential line drivers and receivers.

LMH6714/6720/6722 is a high speed video op amp, which features 400MHz small signal bandwidth, 1800V/µs slew rate and 0.01% and 0.01˚ differential gain and phase errors.

The LMH6704 is a high-performance, high-dynamic-range video amplifier from National Semiconductor that provides +1, +2, and -1 V/V user-programmable gain. With a 650 MHz small-signal bandwidth (AV = +1), full power gain flatness to 200 MHz, and excellent differential gain and phase, the LMH6704 is optimized for video applications. The LMH6704 is fabricated using National Semiconductor's proprietary high-speed complementary bipolar process and employs National Semiconductor's proven current feedback circuit architectures. It is available in 8-pin SOIC and 6-pin SOT23 packages.

LMH6702 is a ultra low distortion, wideband op amp from National Semiconductor. It has 720MHz bandwidth, 10-bit distortion levels through 60MHz, 1.83nV/ input referred noise and 12.5mA supply current. It is ideal for high-speed flash A/D and D/A converters.

LMH6682/6683 is a high performance single supply op amp from National Semiconductor, with a bandwidth of 190MHz, a slew rate of 940V/µsec, and an accuracy of ±0.01%.

The LMH6678 is a low power 2-channel central-office xDSL driver that uses dual current feedback op amps to achieve a fixed gain of AV = +5.4, with high integration and low power consumption. It can provide 580 mW at 19.8 dBm line output power. The LMH6678 can also be put into a listen mode to maintain the termination for receive signals with 100 mW/Ch power dissipation. The LMH6678 has two separate 2-bit power control inputs compatible with 3.3V CMOS for each channel, which enable independent control of line status. When the drivers for both channels are shut off, power consumption drops to only 6 mW. Thermal Shutdown function protects the IC from a shorted line fault or system over temperature. The LMH6678 is available in a 5mm x 4mm 24-lead LLP package.

The LMH6672 is a dual high speed op amp from Texas Instruments that has the ability to drive signals within 1V of the power supply rails. It features the high output drive with low distortion required for the demanding application of a single supply xDSL line driver.

The LMH6654/55 is a single/dual channel, low power, 250MHz, low noise amplifier from National Semiconductor. It has a true single supply capability with an input common mode voltage range of -5.15V to +3.7V. The LMH6654/55 is ideal for many portable, high speed applications where power is at a premium.

The LMS75ALS176A is a bidirectional data communications transceiver from TI that meets ANSI standards TIA/EIA RS422-B, TIA/ EIA RS485-A and ITU recommendation V.11 and X.27. It combines a TRI-STATE™ differential line driver and differential input receiver, both of which operate from a single 5.0V power supply. The driver and receiver have an active high and active low enable, respectively, that can be externally connected to function as a direction control. The driver and receiver differential inputs are internally connected to form differential input/output (I/O) bus ports that are designed to offer minimum loading to bus whenever the driver is disabled or when VCC = 0V. These ports feature wide positive and negative common mode voltage ranges, making the device suitable for multipoint applications in noisy environments.