Industrial

ST490AB is a low power RS-485/RS-422 transceiver featuring 5mA max supply current, -7V to 12V common mode input voltage range, 70mV typical input hysteresis, 25Mbps operation, single 5V supply, ±4kV ESD protection, current limiting and thermal shutdown

The ST485ERB is a low power RS-485/RS-422 transceiver from ST company. Its features are low quiescent current (300μA), support -7V to 12V input voltage range, can keep the driver in high impedance through 3-state or power off, has 70mV typical input hysteresis, 30ns propagation delay and 5ns skew, single 5V power supply, overload protection, ESD protection and other functions.

SERCON816 is a single-chip SERCOS interface controller for real-time communication for industrial control systems.

TD220/221 is a solution for micro-controller based off-line applications. It includes a two point regulator for power supply generation, a 3.3V (TD220) or 5V (TD221) linear regulator for the microcontroller supply, and a MOSFET driver.

The ST8004 is a complete low cost analog interface for asynchronous 3V and 5V smart cards. It can be placed between the card and the microcontroller with few external components to perform all supply protection and control functions. Main applications are: smartcard readers for Set Top Box, IC card readers for banking, identification.

TDE1897C/TDE1898C is a monolithic intelligent power switch in Multipower BCD Technology, for driving inductive or resistive loads. An internal Clamping Diode enables the fast demagnetization of inductive loads. Diagnostic for CPU feedback and extensive use of electrical protections make this device inherently indistructible and suitable for general purpose industrial applications.

the stmp01 is a single phase programmable energy metering ic with tamper detection from stmicroelectronics. it can measure active, reactive, apparent energies and rms values.

This document is the user manual for VNQ860-E, VNQ860SP-E. It introduces the features of the product, including current limiting, overvoltage protection, short circuit protection, thermal shutdown, standby current, ground disconnection protection.

The TD351 is an advanced gate driver for IGBT and power MOSFETs, It has a current capability of 1.7A sink and 1.3A source, it supports pulse transformer and optocoupler input, and has UVLO protection and 2kV ESD protection

ST3232B and ST3232C are 3 to 5.5 V, low power, up to 400 kbps RS-232 drivers and receivers. Product features include 300µA supply current, 300 kbps minimum guaranteed data rate, 6V/µs minimum guaranteed slew rate, Meet EIA/TIA-232 specifications down to 3V, and are available in SO-16, SO-16 large and TSSOP16 packages.

ST485B/ST485C is a low power RS-485/RS-422 transceiver from ST company. It features low quiescent current (300 µA), single 5V supply, can work in -40 °C to 85 °C industrial temperature range. It is suitable for bidirectional data communication.

ST202B ST202C 5V powered multi-channel RS-232 drivers and receivers

The STLVD111 is a programmable low voltage 1:10 differential LVDS clock driver with 100ps part-to-part skew and 50ps bank skew. It features a differential design that meets LVDS specifications for driver outputs and receiver inputs. The driver has a reference voltage available output VBB, a low voltage VCC range of 2.375V to 2.625V, high signalling rate capability (exceeds 622MHz), support for open, short and terminated input fail-safe (low output state), and programmable drivers power off control.

This document describes the features and characteristics of the ST207EB and ST207EC 5 V RS-232 transceivers, including ±15 kV ESD protection for RS-232 I/O pins, 230kbps data rate, guaranteed minimum slew rate of 3 V/ms, and operation from a single 5 V power supply. It is designed for RS-232 and V.28 communications in harsh environments.

ST26C31B is a quad differential line driver designed by ST company for digital data transmission over balanced lines. It supports TTL or CMOS input, with a typical propagation delay of 6ns and a typical output skew of 0.5ns.