Industrial

The ST3222 is a 3 V powered EIA/TIA-232 and V.28/V.24 communications interface with low power requirements and high data-rate capabilities. ST3222 has a proprietary low dropout transmitter output stage providing true RS-232 performance from 3 to 3.6 V power supplies. The device requires only four small 0.1 mF standard external capacitors for operating from 3 V supply. The ST3222 has two receivers and two drivers. The ST3222 features a 1 mA shutdown mode that reduces power consumption and extends battery life in portable systems. Its receivers can remain active in shutdown mode, allowing external devices such as modems to be monitored using only 1 mA supply current. The device is guaranteed to run at data rates of 250 Kbps while maintaining RS-232 output levels. Typical applications are notebooks, sub- notebooks and palmtop computers, battery powered equipment, hand-held equipment, peripherals and printers.

The ST26C32AB is a ST company's CMOS quad 3-state differential line receiver. It features low power consumption, ±0.2V sensitivity, typical propagation delay of 19ns, typical input hysteresis of 60mV, meets EIA standard RS-422, RS-423 requirements, and can be used to connect system buses.

The STLVDS31B is a quad differential line drivers that implements the electrical characteristics of low voltage differential signaling (LVDS). This signaling technique lowers the output voltage levels of 5 V differential standard levels (such as TIA/EIA-422B) to reduce the power, increase the switching speeds and allows operations with a 3.3 V supply rail. Any of the four current mode drivers will deliver a minimum differential output voltage magnitude of 247 mV into a 100 Ω load when enabled.

ST485EB is a low power RS-485/RS-422 transceiver from ST, which features low quiescent current, -7V~12V input voltage range, 30ns propagation delay, 5ns skew, 5V single power supply, support 256 transceivers parallel communication

The TSA1204 is a new generation of high performance, low power consumption, high speed dual-channel analog-to-digital converter, which is implemented in a mainstream 0.25µm CMOS technology and provides excellent performance and very low power consumption.

The ST3232EB and ST3232EC are low power (300µA), high data rate (250kbps), RS-232 drivers and receivers with ±15kV ESD protection.

The ST3237E is a 3 V to 5.5 V powered EIA/TIA-232 and V.28/V.24 communication interfaces high data-rate capability and enhanced electrostatic discharge (ESD) protection at ±8 kV using IEC1000-4-2 contact discharge and ±15 kV using Human Body Model (HBM). The other pins are protected with standard ESD protection at ±2 kV using HBM method. The ST3237C is a transceiver (5 drivers, 3 receivers) for fast modem applications. The device has a proprietary low-dropout transmitter output stage providing true RS-232 performance from a 3 V to 5.5 V supply using a dual charge pump. The device is guaranteed to run at data rates of 250 kbps in the normal operation mode and 1 Mbps in the very high speed operation mode while maintaining RS-232 output levels.

ST3222E is a 3 V powered EIA/TIA-232 and V.28/V.24 communications interface with low power requirements, high data-rate capabilities and enhanced electrostatic discharge (ESD) protection to ± 8 kV using IEC1000-4-2 Contact Discharge and ±15 kV using the Human Body Model. ST3222E has a proprietary low dropout transmitter output stage providing true RS-232 performance from 3 to 5 V supplies with a dual charge pump. The charge pump requires only four small 0.1 μF external capacitors for operation form 3 V supply. The device has two receivers and two drivers. The ST3222E features a 1 mA shutdown mode that reduces power consumption and extends battery life in portable systems. Its receivers can remain active in shutdown mode, allowing external devices such as modems to be monitored using only 1 mA supply current. The device is guaranteed to run at data rates of 250 Kbps while maintaining RS-232 output levels. Typical applications are Notebook, Sub-notebook and Palmtop Computers, Battery Powered Equipment, Hand-Held Equipment, Peripherals and Printers.

ST3241EB and ST3241EC are ±15 kV ESD protected 3 to 5.5 V, 400 kbps RS-232 transceivers with auto-power-down. The features include ESD protection for RS-232 I/O pins, 1 µA supply current, minimum guaranteed data rate of 250 kbps, guaranteed 6 V/ms slew rate range, guaranteed mouse drive ability, 0.1 µF external capacitors, and compliance with EIA/TIA-232 specifications.

The ST1480AB/ST1480AC is a 3.3V powered, 15kV ESD protected, up to 12 Mbps true RS-485/RS-422 transceiver. The transceiver has a common mode input voltage range of -7 to 12, a maximum of 1µA low current shutdown mode, guaranteed data rate of 12Mbps, industry standard 75176 pinout, driver overload protection with current limiting and thermal shutdown, guaranteed high receiver output state for floating, shorted or terminated inputs with no signal present, and allows up to 64 transceivers on the bus

The ST3485E is ±15 kV ESD protected, 3.3 V low power transceiver for RS-485 and RS-422 communications.

The ST485A is a low power, high speed RS-485/RS-422 transceiver with a maximum supply current of 5mA and a data rate of up to 30Mbps.