Industrial

TSM1052 is a highly integrated solution for SMPS applications requiring a dual control loop to perform CV (constant voltage) and CC (constant current) regulation. It integrates a voltage reference, two op amps (with OR-ed open-drain outputs), and a low-side current sensing circuit.

STM1404 is a 3V FIPS-140 security supervisor from STMicroelectronics, supports FIPS-140 security level 4, and has four high-impedance physical tamper inputs, overvoltage/undervoltage detector, security alarm (SAL), overtemperature/low temperature detector, optional VREF(1.237V), low power supply current(5.3µA), RoHS compliance and so on.

STM1403 is a 3V FIPS-140 security supervisor with battery switchover. It supports FIPS-140 security level 3+ and features four high-impedance physical tamper inputs, over/under operating voltage detector, security alarm, supervisory functions, automatic battery switchover, and more.

This document describes the features and characteristics of the STLQ50XX 50 mA, 3 µA supply current low drop linear regulator, released in November 2007. It has an input voltage range of 2.3V to 12V, a maximum output current of 50mA, and a quiescent current of 3µA. It is available in fixed output voltages of 1.8V, 2.5V, 3.3V, 5.0V, and adjustable. The dropout voltage is 200mV at 25mA output current. It also has internal thermal protection. It is suitable for portable/battery powered equipment, electronic sensors, microcontroller power, and real time clock backup power.

Introduces the features and applications of L6562A switch power supply controller

STCF03 is a high efficiency white LED driver from ST with I²C interface and support 16-bit dimming.

LD39300 is a fast ultra low drop linear regulator from ST company. It works from 2.5V to 6V input supply and offers a wide range of output options. The device has 3A maximum output current, 200mV typical dropout voltage, 1.2mA typical static current, logic controlled electronic shutdown function, current and thermal limit, ±1.5% output voltage tolerance, -40 to 125°C temperature range. LD39300 is suitable for microprocessor power supply, DSPs power supply, post regulators for switching suppliers and high efficiency linear regulator etc.

LD39080 is an ultra low drop linear regulator produced by ST company. It operates from 2.5V to 6V input supply and has a wide range of output options. The low drop voltage, low noise, and ultra low quiescent current make it suitable for low voltage microprocessor and memory applications

This datasheet mainly introduces the features and functions of st w4102 dual usb/wall adapter li-ion battery charger with gas gauge

The L6933H1.2 is a high-performance 2A ULDO linear regulator with soft start features. It operates from 2V to 14V input voltage range and has a maximum rDS(on) of 200mΩ. The quiescent current is 200µA at any load. The regulator provides excellent load and line regulation, and is adjustable from 1.2V to 5V with a voltage regulation accuracy of 1%. It also features a power good output, support for MLCC capacitors filter, adjustable soft start, short circuit protection, and thermal shutdown. The L6933H1.2 is suitable for applications such as motherboards, mobile PCs, handheld instruments, PCMCIA cards, processors I/O, and chipset and RAM supply.

The L5985 is a 2A output current step-down switching regulator from ST with input voltage range of 2.9V to 18V, output voltage range of 0.6V to VIN, 250kHz switching frequency, internal soft-start and inhibit, 100% duty cycle, voltage feed-forward, zero load current operation, over current and thermal protection, and VFQFPN8 3mm x 3mm package.

The L5983 is a step-down switching regulator with a 1.5A DC output current, 2.9V to 18V input voltage range, adjustable output voltage starting from 0.6V, programmable switching frequency up to 1MHz, internal soft-start and inhibit, low dropout operation with 100% duty cycle, voltage feed-forward, zero load current operation, overcurrent and thermal protection.

The L5981 is a 1A step-down switching regulator with 1.5A (min.) current limited embedded power MOSFET, so it is able to deliver in excess of 1A DC current to the load depending on the application condition. The input voltage can range from 2.9V to 18V, while the output voltage can be set starting from 0.6V to VIN. Having a minimum input voltage of 2.9V, the device is suitable also for 3.3V bus. Requiring a minimum set of external components, the device includes an internal 250kHz switching frequency oscillator that can be externally adjusted up to 1MHz. The VFQFPN8 package with exposed pad allows reducing the RthJA down to approximately 60°C/W.