Industrial

The LDCL015XX series is a 150mA current, 1.8V~5.5V input voltage, ultra low dropout linear regulator IC, no input or output capacitor required, with low static current, low noise, no output capacitor and other characteristics, very suitable for low power battery powered applications, can be applied to mobile phones, PDA and other portable devices

The STM6519 is a 4-pin Smart Reset™ device featuring low supply current, integrated test mode, fixed extended reset setup delay, single Smart Reset™ push-button input with option for internal input pull-up resistor, push-button controlled reset pulse duration, defined output reset pulse duration, single reset output, fixed Smart Reset input logic voltage levels, operating temperature range -40°C to +85°C, UDFN4 package 1.00 mm x 1.45 mm and UDFN6 package 1.00 mm x 1.45 mm, ECOPACK®2 (RoHS compliant, Halogen-Free).

The L7986TA is a 3A step-down switching regulator with 3.7 A (min.) current limited embedded power MOSFET, so it is able to deliver up to 3 A current to the load depending on the application conditions. The input voltage can range from 4.5 V to 38 V, while the output voltage can be set starting from 0.6 V to VIN.

The STEF12 is a 12V line electronic fuse. It has a continuous current of 3.6A, an N-channel on-resistance of 53 mΩ, enable/fault functions, an output clamp voltage of 15 V, undervoltage lockout, short-circuit limit, overload current limit, controlled output voltage ramp, thermal latch of 165 °C, tiny capacitors, a working junction temperature of -40 °C to 125 °C, and a DFN10 (3x3 mm) package. It is mainly used in hard disk drives, solid state drives (SSD), hard disk and SSD arrays, set-top boxes, DVD and Blu-ray disc drivers.

The STEF05 is an integrated electronic fuse optimized for monitoring output current and input voltage. Connected in series to a 5 V rail, it is capable of protecting the electronic circuitry on its output from overcurrent and overvoltage. The device has a controlled delay and turn-on time. When an overload condition occurs, the STEF05 limits the output current to a predefined safe value. If the anomalous overload condition persists, it goes into an open state, disconnecting the load from the power supply. If a continuous short-circuit is present on the board, when power is re-applied the E-fuse initially limits the output current to a safe value, and then again goes into an open state. The device is equipped with a thermal protection circuit. The intervention of the thermal protection is signalled to the external circuit, indicating that there is a short circuit.

The STODD03 is a 2-channel power management device intended for Blu-Ray applications based on high density optical storage devices. It integrates one step-down converter able to provide 3.3V fixed output voltage up to 700mA load, and one step-up converter to provide the power supply needed for the blue laser in applications where only 5V input voltage is available. The step-up output voltage is adjustable in the range from 6.5V to 14V, with current capability up to 500mA. Both step-down and step-up channels integrate low RDS_ON N-channel and P-channel MOSFETs, allowing high DC-DC efficiencies. The STODD03 has a 1A integrated power switch.

The SPV1001N is a system-in-package solution for photovoltaic applications to perform cool bypass rectification similar to that of a conventional Schottky diode but with much lower forward voltage drop and reverse leakage current.

The SPV1002 is a system-in-package solution for photovoltaic applications to perform cool bypass rectification similar to that of a conventional Schottky diode but with much lower forward voltage drop and reverse leakage current. Applications: Photovoltaic panels.

This document describes the features and characteristics of a product in full production in July 2012, including fixed output voltage, ultra-low operating current, high precision, stability, and temperature range.

The document describes a 2.5 A step down switching regulator for automotive applications, which is qualified according to AEC-Q100 requirements. It features an operating input voltage range of 4 V to 36 V, a 3.3 V / (±2%) reference voltage, an adjustable output voltage from 1.235 V to 35 V, low dropout operation with 100% duty cycle, 250 kHz fixed frequency, voltage feedforward, zero load current operation, etc.

The A5974AD is a step-down switching regulator designed for automotive applications. It can deliver up to 2A DC current to the load with an input voltage range of 4V to 36V. The output voltage can be adjusted from 1.235V to 35V. It utilizes an internal P-channel DMOS transistor as the switching element, and has a minimum input voltage of 4V, making it suitable for automotive applications even in cold crank conditions.

The A5975AD is a AEC-Q100 qualified 2.5A step-down switching regulator with a 3.3V reference voltage and an adjustable output voltage from 1.235V to 35V.

The A5975D is a AEC-Q100 qualified 3 A step-down switching regulator for automotive applications.

The STBP110 is an overvoltage protection device produced by STMicroelectronics. It features input overvoltage protection, soft-start, low RDS(on), maximum continuous current of 1.2A, thermal shutdown, TDFN 8-lead package, etc. It is used in smart phones, digital cameras, PDAs and palmtop devices, MP3 players and low power handheld devices.

This document describes the performance characteristics of Rainhong's 25PJDA-C, P5R, and AG-5 Maxi-Paw, including water pressure, half-circle operation, optimum water distribution, and performance under zero wind conditions.