Industrial

The L6564T is a 10-pin transition-mode PFC controller with features including guaranteed extreme temperature range, fast bi-directional input voltage feedforward, accurate adjustable output overvoltage protection, protection against feedback loop disconnection, inductor saturation protection, AC brownout detection, low startup current, 6mA max operating bias current, 1% internal reference voltage, -600/+800mA totem pole gate driver with active pull-down during UVLO, and SSOP10 package.

LNBH25L is an LNB supply and control IC with step-up and I²C interface. It features a built-in DC-DC converter for single 12V supply operation and high efficiency (typ. 93% @ 0.5A). The output current limit can be selected by an external resistor. The IC is compliant with main satellite receiver output voltage specifications and has an accurate built-in 22kHz tone generator. It also has a low-drop post regulator and high efficiency step-up PWM with integrated power N-MOS, allowing for low power losses. The IC provides overload and overtemperature internal protection with I²C diagnostic bits and LNB short-circuit dynamic protection.

The STOD03AS is a dual DC-DC converter with short-circuit protection for AMOLED display panels. It integrates a step-up and an inverting DC-DC converter making it particularly suitable for battery operated products, in which the major concern is overall system efficiency. It works in pulse skipping mode during light load conditions and PWM-MODE at 1.5 MHz frequency for medium/high load conditions. The high frequency allows the value and size of external components to be reduced. The Enable pin allows the device to enter shutdown mode.

STOD03B is a dual DC-DC converter for AMOLED display panels. It integrates a step-up and an inverting DC-DC converter making it particularly suitable for battery operated products, in which the major concern is the overall system efficiency. It works in pulse skipping mode during low load conditions and PWM-MODE at 1.5 MHz frequency for medium/high load conditions. The high frequency allows the value and size of external components to be reduced.

The STOD1317B is a fixed frequency, high efficiency, boost DC-DC converter with cascaded LDO able to provide output voltages ranging from 6 V to 13 V starting with an input voltage from 2.6 V to 4.8 V. The device is designed to supply loads that are very sensitive to output ripple such as AMOLED display panels. A dedicated LDO is able to suppress any ripple and noise coming out from the DC-DC converter. The LDO works with a constant drop in order to maintain high efficiency in the whole operating range. The low RDSon N- channel and P-channel MOSFET switches are integrated and contribute to achieving high efficiency. The true-shutdown feature allows physical disconnection of the battery from the load when the device is in shutdown mode. The control technique is able to maintain efficiency higher than 85% at light loads and higher than 80% at full load. The device includes soft-start control, inrush current

The STOD13A is a dual DC-DC converter for AMOLED display panels. It integrates a step-up and an inverting DC-DC converter making it particularly suitable for battery operated products, in which the major concern is overall system efficiency. It works in pulse skipping mode during low load conditions and PWM-MODE at 1.5 MHz frequency for medium/high load conditions. The high frequency allows the value and size of external components to be reduced. The Enable pin allows switching to shutdown mode.

The L7986 is a 3A step-down switching regulator from ST. It features an output current of up to 3A, an input voltage range of 4.5V to 38V, and an output voltage that can be set from 0.6V to VIN. The device includes an internal 250kHz switching frequency oscillator that can be externally adjusted up to 1MHz. The QFN and HSOP packages with exposed pad allow reducing the RthJA down to 60°C/W and 40°C/W respectively.

The L7985/A is ST's 2A step-down switching regulator with 2.5A (minimum) current limited embedded power MOSFET, so it is able to deliver up to 2A current to the load depending on the application conditions. The input voltage can range from 4.5V to 38V, while the output voltage can be set starting from 0.6V to VIN. The device requires a minimum set of external components, and includes an internal 250kHz switching frequency oscillator that can be externally adjusted up to 1MHz. The QFN and the HSOP packages with exposed pad allow reducing the RthJA down to 60°C/W and 40°C/W respectively.

The LNBH25 is a monolithic voltage regulator and interface IC for analog and digital satellite receivers/Sat-TV and Sat-PC cards. It provides the 13/18 V power supply and the 22 kHz tone signaling to the LNB down-converter in the antenna dish or to the multi-switch box. It offers a complete solution with extremely low component count and low power dissipation together with a simple design and I²C standard interfacing.

This document provides information on the features of the STM6524 6-pin Smart Reset™ product. The product operates at a voltage range of 1.65V to 5.5V and has a low supply current of 1.5µA. It includes an integrated test mode and dual Smart Reset™ push-button inputs. The reset setup delay can be set from 0.5 seconds to 10 seconds in 0.5-second steps, with an option for an internal pull-up resistor. The product does not have a power-on reset and the reset output can be active low or active high, with push-pull or open drain options. It operates in a temperature range of -40°C to +85°C and is packaged in a UDFN6 package with dimensions of 1.6mm x 1.3mm.

This datasheet provides information on the STLED25, a 5-channel step-up white LED driver with high side current source and PWM dimming. The driver can provide up to 125 mA of total current per channel with a maximum voltage of 7.5 V. It also features a self-test feature to detect any LED failure and disable the related channel.

This datasheet provides the production data for the STMicroelectronics STLD41 white LED driver. The driver can be used to drive up to 40 white LEDs (4 strings of 10 LEDs), with a maximum output current of 120 mA. The input voltage range is 3.0 V to 21 V.

VIPER37 VIPerPlus family is a fixed frequency offline converter with the following features: 800 V avalanche rugged power section, PWM operation with adjustable limiting current, 30 mW standby power at 265 Vac, operating frequency of 60 kHz for L type and 115 kHz for H type, frequency jittering for low EMC, output overvoltage protection, high primary current protection (2nd OCP), input undervoltage setting (brownout), onboard soft-start, safe auto-restart after a fault condition, and hysteretic thermal shutdown. Applications include SMPS for set-top boxes, DVD players and recorders, white goods, consumer and home equipment auxiliary power supply, ATX auxiliary power supply, and low/medium power AC-DC adapters.

The STC3105 is a low-power battery monitor IC from ST company, which integrates low-cost battery voltage monitoring, programmable threshold low battery alarm output, open-circuit voltage and coulomb counter battery charge calculation, small 3x2mm package, etc. Applicable to mobile phones, multimedia players, digital cameras, portable medical equipment and other applications.