Motorola manuals, page 22
MOTOROLA MC10E196/MC100E196 handbook
MOTOROLA MC10E195/MC100E195 handbook(1)
The MC10E/100E195 is a programmable delay chip designed primarily for clock de-skewing and timing adjustment. It provides variable delay of a differential ECL input transition. The chip offers high resolution and frequency, allowing for very accurate system clock timing selectable entirely from a digital input.
MOTOROLA MC10E195/MC100E195 handbook
The file is a product datasheet of MC10E195/D from Motorola company. MC10E195/D is a programmable delay chip (PDC) designed primarily for clock de-skewing and timing adjustment. It provides variable delay of a differential ECL input transition. The delay section consists of a chain of gates organized as shown in the logic symbol. The first two delay elements feature gates that have been modified to have delays 1.25 and 1.5 times the basic gate delay of approximately 80 ps. These two elements provide the E195 with a digitally-selectable resolution of approximately 20 ps. The required device delay is selected by the seven address inputs D[0:6], which are latched on chip by a high signal on the latch enable (LEN) control. Because the delay programmability of the E195 is achieved by purely differential ECL gate delays the device will operate at frequencies of >1.0 GHz while maintaining over 600 mV of output swing. The E195 thus offers very fine resolution, at very high frequencies, that is selectable entirely from a digital input allowing for very accurate system clock timing. An eighth latched input, D7, is provided for cascading multiple PDC’s for increased programmable range. The cascade logic allows full control of multiple PDC’s, at the expense of only a single added line to the data bus for each additional PDC, without the need for any external gating.
MOTOROLA MC10E193/MC100E193 handbook(1)
The MC10E/100E193 is an error detection and correction (EDAC) circuit. Modified Hamming parity codes are generated on an 8-bit word according to the pattern shown in the logic symbol. The P5 output gives the parity of the whole word. The word parity is also provided at the PGEN pin, after Odd/Even parity control and gating with the BPAR input. This output also feeds to a 1-bit shiftable register, for use as part of a scan ring. Used in conjunction with 12-bit parity generators such as the E160, a SECDED (single error correction, double error detection) error system can be designed for a multiple of an 8-bit word.
MOTOROLA MC10E193/MC100E193 handbook
The MC10E/100E193 is an error detection and correction (EDAC) circuit. Modified Hamming parity codes are generated on an 8-bit word according to the pattern shown in the logic symbol. The P5 output gives the parity of the whole word. The word parity is also provided at the PGEN pin, after Odd/Even parity control and gating with the BPAR input. This output also feeds to a 1-bit shiftable register, for use as part of a scan ring. Used in conjunction with 12-bit parity generators such as the E160, a SECDED (single error correction, double error detection) error system can be designed for a multiple of an 8-bit word.
MOTOROLA MC10E175/MC100E175 handbook(1)
The MC10E/100E175 is a 9-bit latch. It also features a tenth latched output, ODDPAR, which is formed as the odd parity of the nine data inputs (ODDPAR is HIGH if an odd number of the inputs are HIGH). The E175 can also be used to generate byte parity by using D8 as the parity-type select (L = even parity, H = odd parity), and using ODDPAR as the byte parity output. The LEN pin latches the data when asserted with a logical high and makes the latch transparent when placed at a logic low level.
MOTOROLA MC10E175/MC100E175 handbook
The MC10E/100E175 is a 9-bit latch. It also features a tenth latched output, ODDPAR, which is formed as the odd parity of the nine data inputs (ODDPAR is HIGH if an odd number of the inputs are HIGH). The E175 can also be used to generate byte parity by using D8 as the parity-type select (L = even parity, H = odd parity), and using ODDPAR as the byte parity output. The LEN pin latches the data when asserted with a logical high and makes the latch transparent when placed at a logic low level.
MOTOROLA MC10E171/MC100E171 handbook(1)
The MC10E/100E171 is a 4:1 multiplexer with differential outputs. It features separate select controls and an extended 100E VEE range.
MOTOROLA MC10E171/MC100E171 handbook
This data sheet provides information about the MC10E/100E171 3-Bit 4:1 MULTIPLEXER, including pin names, functions, and voltage ranges
MOTOROLA MC10E167/MC100E167 handbook(1)
The MC10E/100E167 contains six 2:1 multiplexers followed by D flip-flops with single-ended outputs. Input data are selected by the Select control, SEL. The selected data are transferred to the flip-flop outputs by a positive edge on CLK1 or CLK2 (or both). A HIGH on the Master Reset (MR) pin asynchronously forces all Q outputs LOW.
MOTOROLA MC10E167/MC100E167 handbook
The MC10E/100E167 is a 6-bit 2:1 multiplexer with single-ended outputs. Input data is selected by the Select control (SEL) and transferred to the flip-flop outputs by a positive edge on CLK1 or CLK2. A HIGH on the Master Reset (MR) pin asynchronously forces all Q outputs LOW.
MOTOROLA MC10E166/MC100E166 handbook(1)
The MC10E/100E166 is a 9-bit magnitude comparator that compares the binary value of two 9-bit words and indicates whether one word is greater than, or equal to, the other.
MOTOROLA MC10E166/MC100E166 handbook
The MC10E/100E166 is a 9-bit magnitude comparator that compares the binary value of two 9-bit words and indicates whether one word is greater than, or equal to, the other.
MOTOROLA MC10E1651 handbook
The MC10E1651 is functionally and pin-for-pin compatible with the MC1651 in the MECL III family, but is fabricated using Motorola’s advanced MOSAIC III process. The MC10E1651 incorporates a fixed level of input hysteresis as well as output compatibility with 10KH logic devices. In addition, a latch is available allowing a sample and hold function to be performed. The device is available in both a 16-pin DIP and a 20-pin surface mount package. The latch enable (LENa and LENb) input pins operate from standard ECL 10KH logic levels. When the latch enable is at a logic high level the MC10E1651 acts as a comparator, hence Q will be at a logic high level if V1 > V2 (V1 is more positive than V2). Q is the complement of Q. When the latch enable input goes to a low logic level, the outputs are latched in their present state providing the latch enable setup and hold time constraints are met.
MOTOROLA MC10E164/MC100E164 handbook(1)
The MC10E/100E164 is a 16:1 multiplexer with a differential output. The select inputs (SEL0, 1, 2, 3 ) control which one of the sixteen data inputs (A0 – A15) is propagated to the output. Special attention to the design layout results in a typical skew between the 16 inputs of only 50ps.