Torex manuals, page 13
TOREX XC25BS8Series Manual
XC25BS8 series ultra small PLL clock generator ICs with built-in divider/multiplier circuits
TOREX XC25BS7Series Manual
The XC25BS7 series is a high frequency, low power consumption PLL clock generator IC with divider circuit & multiplier PLL circuit. Laser trimming gives the option of being able to select from input divider ratios (M) of 1 to 256 and output divider ratios (N) of 1 to 256. Output frequency (fQ0) is equal to reference clock oscillation (fCLKin) multiplied by N/M, within a range of 1MHz to 100MHz. Further, frequency within a range of 32kHz to 36MHz can be inputted as a reference clock. The IC stops operation when low level signal is inputted to the CE pin. For this, consumption current can be reduced and output will be one of high-impedance. Because the series is semi-custom, please ask Torex sales contacts for your requested specifications such as input/output frequency, supply voltage. However, the series has the limit of specifications; therefore, your request may not be fully satisfied with your requested frequency range.
TOREX XC25BS5Series Manual
XC25BS5 series PLL clock generator ICs with built-in divider/multiplier circuits (For Low Frequency Range)
TOREX XC2173Series Manual
The XC2173 series are high frequency, low power consumption CMOS ICs with built-in crystal oscillator, divider and clock multiplier PLL circuits. Output is selectable from any one of the following values for f0: f0 x 5, f0 x 6, f0 x 7, f0 x 8, f0/2, f0/4, f0/8. By connecting an external standard clock, the above mentioned output frequencies can be achieved.
TOREX XC2301Series Manual
The XC2301 series is a group of high frequency, CMOS low power tri-state buffer ICs with input amplifier, divider and output tri-state buffer circuits built-in. Output can be selected from any one of the following values for fin (input frequency): fin/1, fin/2, fin/4, fin/8. The series is available in an ultra small SOT-26 package.
TOREX XC2300Series Manual
The XC2300 Series is a group of high frequency, CMOS low power tri-state buffer ICs with input amplifier, divider and output tri-state buffer circuits built-in. The series is available in an ultra small SOT-26 package.
TOREX XC2165Series Manual
The XC2165 series of low-voltage crystal oscillator ICs are CMOS ICs that operate from a supply voltage range of 1.5V to 3.6V with built-in crystal oscillator and divider circuits. The output can be selected from any one of the following values for f0: f0/1, f0/2, f0/4, f0/8. With oscillation capacitors and a feedback resistor built-in, it is possible to configure a stable fundamental oscillator using only an external crystal. In stand-by mode, oscillation stops completely and output pin Q0 becomes in the state of high impedance. The XC2165 series are integrated into SOT-26 packages. The series is also available in chip form.
TOREX XC2164Series Manual
The XC2164 series are high frequency, low current consumption CMOS ICs with built-in crystal oscillator and divider circuits. Output is selectable from f0/1, f0/2, f0/4, and f0/8. With oscillation capacitors and a feedback resistor built-in, it is possible to configure a stable fundamental oscillator or 3rd overtone oscillator using only an external crystal. The series has built-in stand-by function and is available in two types: one that suspends the oscillation completely (XC2164A~D type) and one that suspends only the output (XC2164K~N type). The XC2164 series is integrated into SOT-26 packages and is also available in chip form.
TOREX XC2163Series Manual
The XC2163 series are high frequency, low current consumption CMOS ICs with built-in crystal oscillator and divider circuits. Output is selectable from any one of the following values for f0: f0/1, f0/2, f0/4, f0/8. With oscillation capacitors and a feedback resistors built-in, it is possible to configure a stable 3rd overtone oscillator using only an external crystal oscillator. Also available is an external oscillation capacitor/external oscillation feedback resistor type, which makes oscillation frequency control possible.
TOREX XC74WL86AASR Manual
XC74WL86AASR is a dual 2-input exclusive OR Gate manufactured using silicon gate CMOS processes. The small supply current, which is one of the features of the CMOS logic, gives way to high speed operations which enables LS-TTL. With wave forming buffers connected internally, stabilized output can be achieved as the series offers high noise immunity. As the series is integrated into a mini molded, MSOP-8B package, high density mounting is possible.
TOREX XC74WL4066SR Manual
XC74WL4066SR is a dual analog switch manufactured using silicon gate CMOS processes. It features small supply current, high speed, low power consumption, and low on resistance.
TOREX XC74WL4053SR Manual
XC74WL4053SR is a 2-channel analog multiplexer/demultiplexer manufactured using silicon gate CMOS processes. The series offers high noise immunity and is integrated in a mini molded, MSOP-8B package for high density mounting.
TOREX XC74WL32AASR CMOS Logic Manual
XC74WL32AASR is a dual 2-input OR gate manufactured using silicon gate CMOS processes.
TOREX XC74WL241ASR CMOS Logic Manual
XC74WL241ASR is a dual bus buffer manufactured using silicon gate CMOS processes. The small supply current, which is one of the features of the CMOS logic, allows for high-speed operations that enable LS-TTL. With internally connected wave forming buffers, stabilized output can be achieved, offering high noise immunity. The series is integrated into a mini molded MSOP-8B package, allowing for high-density mounting.
TOREX XC74WL240ASR CMOS Logic Manual
The XC74WL240ASR is a dual bus buffer manufactured using silicon gate CMOS processes. The small supply current, which is one of the features of the CMOS logic, gives way to high speed operations which enables LS-TTL. With wave forming buffers connected internally, stabilized output can be achieved as the series offers high noise immunity. As the series is integrated into a mini molded, MSOP-8B package, high density mounting is possible.