STMicroelectronics Manuals

The ST23YR04 is a dual contactless smartcard MCU from STMicroelectronics with 4Kbytes EEPROM, enhanced security, cryptoprocessor and optimized RF performance.

This document describes the features and characteristics of the STM7007 single-chip hardware accelerated encryption engine, including world-class encryption engine, support for symmetric and asymmetric algorithms, PCI Express interface, etc.

ST19NP18-TPM is a single-chip Trusted Platform Module (TPM) with embedded TPM 1.2 firmware. It features a 33-MHz Low Pin Count (LPC) interface V1.1 and is compliant with TCG PC client specific TPM Implementation Specification (TIS) V1.2. It is based on the ST19N Secure-Smartcard IC platform and includes a reliable CMOS EEPROM submicron technology. The module supports RSA 1024-bit signature and verification.

ST23R160 is a security smartcard MCU with AES accelerator, 160-Kbyte EEPROM and dual or contact-only interface launched by ST.

ST33TPM12I2C is a Trusted Platform Module (TPM) based on 32-bit ARM® SecurCore® SC300™ CPU with I2C interface, which is compliant with Trusted Computing Group (TCG) Trusted Platform Module (TPM) Main specifications 1.2, Level 2, Revision 116 and TCG PC Client Specific TPM Interface Specifications 1.21. This module features single-chip TPM, embedded endorsement key and endorsement key certificate, support for clock suspension, support for field upgrade and dictionary attack protection, support for software and hardware physical presence, support for temperature range from 0°C to +70°C, support for ESD protection up to 4 kV (HBM), support for 3.3 V supply voltage range, support for 28-lead thin shrink small outline and 32-lead very thin fine pitch quad flat pack ECOPACK® packages.

The ST33TPM12SPI is a TPM (Trusted Platform Module) product based on 32-bit ARM® SecurCore® SC300™ CPU from STMicroelectronics, which is compliant with the Trusted Computing Group (TCG) Trusted Platform Module (TPM) Main specifications 1.2, Level 2, Revision 1.16, and based on TCG PC Client Specific TPM Interface Specifications 1.21, supporting SPI, clock suspension for power saving mode, Field Upgrade and Dictionary Attack protection, and a guaranteed 7-year endurance for monotonic counter. It also supports software and hardware physical presence.

DVIULC6-2x6, HDMIULC6-2x6 and SATAULC6-2x6 are monolithic Application Specific Discretes designed for ESD protection of high speed interfaces. Their ultra low line capacitance ensures high level of signal integrity while protecting downstream sensitive chips against the most stringent characterized ESD strikes.

This document provides full production information on a product, describing its features and characteristics. For further information, please contact your local STMicroelectronics sales office.

The L6741 is a flexible, high-frequency dual-driver specifically designed to drive N-Channel MOSFETs connected in Synchronous-Rectified Buck topology. Combined with ST PWM controllers, the driver allows implementing complete voltage regulator solutions for modern high-current CPUs. The L6741 embeds high-current drivers for both high-side and low-side MOSFETs. The device accepts flexible power supply (5V to 12V) to optimize the gate-drive voltage for high-side and low-side, maximizing system efficiency. The Bootstrap diode is embedded, saving the use of external diodes. Anti shoot-through management avoids high-side and low-side MOSFETs conducting simultaneously, and combined with Adaptive Dead-Time control, minimizes the low-side body diode conduction time. The L6741 embeds preliminary overvoltage protection: after Vcc overcomes the undervoltage lockout and while the device is in high-impedance mode, the low-side

L6743, L6743Q is a high-performance MOSFET driver from ST company. It supports the synchronous rectifier buck topology, and has the characteristics of high drive current, high frequency operation, integrated bootstrap diode, adaptive dead-time management, etc. It is suitable for high current CPU and DCDC converter applications.

The STEVAL-ISA027V1 is a single phase step-down converter evaluation board based on STMicroelectronics' L6726A. It supports 12 V input/1.25 V output @ 20 A, and features high flexibility to host wide range designs and customizable output voltage.

This product is a low cost, high efficiency, high brightness multiple LED driver based on the integrated off-line switching regulator VIPer22A-E. The board is an off-line, constant current power supply capable of driving from 2 to 8 LEDs in series operating from universal mains input. The output current can be selected for compatibility with 1 W, 3 W and 5 W LEDs with a total output power of up to 10 W.

This document describes the STMicroelectronics STEVAL-ILL005V1 VIPer12A-E offline constant current driver for high-intensity LEDs. The driver can drive from 1 to 4 LEDs and has selectable constant current outputs: 350 mA, 700 mA, and 1.05 A. The input voltage range is 90 to 264 VAC, compliant with EN55022 class B for EMI.

The L6756 is a ST power management chip, a two-to-four phase controller designed to power Intel's most demanding processors and, most in general, low-voltage, high-current power supplies. The device features LTB technology® to provide the fastest response to load transients thus minimizing the output filter composition. L6756 embeds selectable DAC: Output Voltage is programmable up to 1.6000 V (Intel VR10 and VR11.x DACs) or up to 1.550 V (AMD 6bit DAC) managing DVID transitions with ±0.5 % output voltage accuracy.