STMicroelectronics manuals, page 205
ST L6756 handbook
The L6756 is a ST power management chip, a two-to-four phase controller designed to power Intel's most demanding processors and, most in general, low-voltage, high-current power supplies. The device features LTB technology® to provide the fastest response to load transients thus minimizing the output filter composition. L6756 embeds selectable DAC: Output Voltage is programmable up to 1.6000 V (Intel VR10 and VR11.x DACs) or up to 1.550 V (AMD 6bit DAC) managing DVID transitions with ±0.5 % output voltage accuracy.
ST L6743B handbook(1)
L6743B is a high-frequency dual-driver designed by ST to drive N-channel MOSFETs connected in synchronous-rectified buck topology.
ST L6716 handbook(1)
The L6716 is a DC-DC converter from STMicroelectronics that supports 2/3/4 phase control, an internal driver, and Intel VR11.1 standards. It features Load Transient Boost Technology, which minimizes the number of output capacitors, and provides 0.5% output voltage accuracy, 8-bit programmable output up to 1.60000 V, support for LSLess startup to manage pre-biased output, and feedback disconnection protection, preliminary over voltage protection, programmable over current protection, programmable over voltage protection, adjustable switching frequency, SS_END and OUTEN signals.
ST PM8803 datasheet
PM8803 is a high efficiency integrated IEEE 802.3at PoE-PD interface and PWM controller from STMicroelectronics, which complies with the IEEE 802.3at standard and can be powered by Ethernet LAN cables or local auxiliary power supplies.
ST PM6691 handbook
This document provides an overview of the PM6691 single-phase controller, including its features, applications and working principle.
ST PM6692 handbook
PM6692 is a two-phase step-down switching controller with embedded gate drivers. It has been designed to supply the CPU and GPU of the Intel® mobile platform, according with INTEL MVP7 specifications.
ST PM6612 handbook
The PM6612 is a high efficiency battery charger with SMBus communication interface. It includes a synchronous switching DC-DC converter with N-channel high-side and low-side Power MOSFET drivers. The possibility to set the switching frequency with SMBus by choosing one of the two preset values of 350 kHz or 700 kHz assures the best trade-off between power conversion efficiency and switching frequency.
ST PM6613N handbook
PM6613N is a high efficiency battery charger with SMBus communication interface from STMicroelectronics. It includes a synchronous switching DC-DC converter with N-channel high-side and low-side Power MOSFET drivers. The possibility to set the switching frequency with SMBus by choosing one of the two preset values of 350 kHz or 700 kHz assures the best trade-off between power conversion efficiency and switching noise.
ST PM6610 handbook
The PM6610 is a high efficiency battery charger with SMBus communication interface. It includes a synchronous switching DC-DC converter with N-channel high-side and low-side Power MOSFET drivers. The possibility to set the switching frequency with SMBus by choosing one of the two preset values of 350 kHz or 700 kHz assures the best trade-off between power conversion efficiency and application compatibility.
ST PM6611N handbook
The PM6611N is a high efficiency battery charger with SMBus communication interface. It includes a synchronous switching DC-DC converter with N-channel high-side and low-side Power MOSFET drivers.
ST STEVAL-ISA071V2 handbook
This document is the datasheet of ST Microelectronics company's STEVAL-ISA071V2 4W non-insulated, wide input voltage range SMPS product
ST EVALSP320SCPU EVALSP320SCPU evaluation board for SPEAr320S handbook
This is preliminary information on a new product now in development or undergoing evaluation. Details are subject to change. For further information, please contact your local STMicroelectronics sales office. This document describes the features of the EVALSP320SCPU evaluation board, including the SPEAr320S embedded MPU, DDR2 memory, Flash memory, USB interfaces, and debug ports.
ST EVALSP320SPLC EVALSP320SPLC evaluation board for SPEAr320S handbook
EVALSP320SPLC is an evaluation board for SPEAr320S microprocessor. It features 2 x Ethernet RJ-45 connectors, 2 x CAN DB9 plug connectors, 3 x RS-232 DB9 plug connectors, 1 x RS-485 DB9 socket connector, digital input connectors, digital output connectors, on-board temperature sensor, potentiometer, analog extension connector, general-purpose extension connector, DC/DC converter, MicroSD card socket, 4 LEDs, 2 general-purpose buttons and system reset button.
ST EVALSP320SHMI SPEAr320S expansion board for HMI applications handbook
EVALSP320SHMI is an expansion board for SPEAr320S for HMI applications. EVALSP320SHMI expansion board can be used with SPEAr320S CPU board (sold separately: order code EVALSP320SCPU) to evaluate the SPEAr320S microprocessor with a variety of devices, especially in its HMI automation mode.
ST STEVAL-MKI117V2 MEMS microphone demonstration board based on the MP45DT02 STM32 handbook
This document introduces the features of STEVAL-MKI117V2 MEMS microphone demonstration board, including power supply, connection method, microphone type, data transmission method, etc.